-------------------------------------- DEVICE LOGS -------------------------------------- Firmware process START. I: Session number: 0 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.012500, Batt Percent: 78. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Display default image. I: Download default image. I: Start Timeout Timer for 3 minutes. I: STATS (ms) 658 _wakeUp settings+send Buffer 2009 refresh time 2668 total time in millis I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.018750, Batt Percent: 78. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 1 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.070000, Batt Percent: 83. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.016250, Batt Percent: 82. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 2 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.070000, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.010000, Batt Percent: 84. E: MQTT Disconnected from Broker I: Handling disconnect - will rescan and retry I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 3 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.066250, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.012500, Batt Percent: 84. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 4 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.068750, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.015000, Batt Percent: 84. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 5 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.067500, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.023750, Batt Percent: 84. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 6 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.067500, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.015000, Batt Percent: 84. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 7 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.065000, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.007500, Batt Percent: 84. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 8 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.066250, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.011250, Batt Percent: 84. E: Lost established connection, rescanning. I: Handling disconnect - will rescan and retry I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 9 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.065000, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.016250, Batt Percent: 84. E: Lost established connection, rescanning. I: Handling disconnect - will rescan and retry I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 10 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.065000, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.016250, Batt Percent: 84. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 11 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.065000, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.005000, Batt Percent: 84. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 12 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.041250, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.010000, Batt Percent: 83. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 13 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.063750, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.010000, Batt Percent: 83. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 14 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.063750, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.013750, Batt Percent: 83. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 15 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.062500, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.011250, Batt Percent: 83. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 16 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.062500, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 27 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.005000, Batt Percent: 83. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 17 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.060000, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.011250, Batt Percent: 83. E: MQTT Disconnected from Broker I: Handling disconnect - will rescan and retry I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 18 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.060000, Batt Percent: 84. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.006250, Batt Percent: 83. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 19 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.061250, Batt Percent: 83. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.997500, Batt Percent: 83. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 20 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.060000, Batt Percent: 83. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 40 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.000000, Batt Percent: 83. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 21 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.058750, Batt Percent: 83. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.008750, Batt Percent: 82. I: WiFi Disconnect complete I: Handling disconnect - will rescan and retry I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 22 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.056250, Batt Percent: 83. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.002500, Batt Percent: 82. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 23 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.056250, Batt Percent: 83. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.996250, Batt Percent: 82. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 24 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.056250, Batt Percent: 83. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.987500, Batt Percent: 82. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 25 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.053750, Batt Percent: 83. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 43 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.998750, Batt Percent: 82. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 26 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.052500, Batt Percent: 83. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 40 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.997500, Batt Percent: 82. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 27 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.052500, Batt Percent: 82. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 33 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.002500, Batt Percent: 82. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 28 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.051250, Batt Percent: 82. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 33 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.982500, Batt Percent: 82. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 29 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.050000, Batt Percent: 82. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.981250, Batt Percent: 82. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 30 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.047500, Batt Percent: 82. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.992500, Batt Percent: 81. E: MQTT Disconnected from Broker I: Handling disconnect - will rescan and retry I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 31 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.047500, Batt Percent: 82. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 25 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.995000, Batt Percent: 81. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 32 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.046250, Batt Percent: 82. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.972500, Batt Percent: 81. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 33 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.045000, Batt Percent: 81. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.990000, Batt Percent: 81. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 34 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.043750, Batt Percent: 81. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 27 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.998750, Batt Percent: 81. E: MQTT Error: type=0x1 E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 35 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.041250, Batt Percent: 81. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.985000, Batt Percent: 80. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Session number: 36 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.040000, Batt Percent: 81. I: Timeout timer Initialised E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. E: SSID not configured in NVS. I: WiFi credentials loaded. I: Scan complete: 9 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Starting Firmware OTA update. I: Current Firmware version: 2.6.1. I: New Firmware Version: 2.7. I: Downloading new firmware version 2.7. I: Installing firmware 2.7. I: OTA update succesfull. I: ESP_RST_SW: Software Reset occured. Firmware process START. I: Firmware version number: 2.7 I: Session number: 0 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.988750, Batt Percent: 81. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.988750, Batt Percent: 80. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7 I: Session number: 1 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.038750, Batt Percent: 81. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.988750, Batt Percent: 80. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7 I: Session number: 2 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.037500, Batt Percent: 80. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.976250, Batt Percent: 80. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7 I: Session number: 3 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.037500, Batt Percent: 80. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.972500, Batt Percent: 80. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7 I: Session number: 4 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.035000, Batt Percent: 80. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.985000, Batt Percent: 80. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7 I: Session number: 5 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.033750, Batt Percent: 80. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Starting Firmware OTA update. I: Current Firmware version: 2.7. I: New Firmware Version: 2.7.1. I: Downloading new firmware version 2.7.1. I: Installing firmware 2.7.1. I: OTA update succesfull. E: MQTT Disconnected from Broker I: ESP_RST_SW: Software Reset occured after OTA updates. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 0 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.970000, Batt Percent: 80. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.981250, Batt Percent: 79. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 1 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.033750, Batt Percent: 80. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.973750, Batt Percent: 79. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 2 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.031250, Batt Percent: 79. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.973750, Batt Percent: 79. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 3 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.027500, Batt Percent: 79. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.971250, Batt Percent: 79. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 4 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.026250, Batt Percent: 79. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.977500, Batt Percent: 78. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 5 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.025000, Batt Percent: 79. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.972500, Batt Percent: 78. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 6 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.023750, Batt Percent: 79. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.982500, Batt Percent: 78. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 7 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.022500, Batt Percent: 78. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.963750, Batt Percent: 78. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 8 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.020000, Batt Percent: 78. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.968750, Batt Percent: 78. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 9 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.017500, Batt Percent: 78. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.973750, Batt Percent: 77. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 10 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.017500, Batt Percent: 78. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.956250, Batt Percent: 77. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 11 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.015000, Batt Percent: 78. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.956250, Batt Percent: 77. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 12 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.015000, Batt Percent: 77. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.948750, Batt Percent: 77. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 13 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.012500, Batt Percent: 77. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.955000, Batt Percent: 77. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 14 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.011250, Batt Percent: 77. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.957500, Batt Percent: 76. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 15 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.008750, Batt Percent: 77. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.953750, Batt Percent: 76. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 16 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.980000, Batt Percent: 77. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.942500, Batt Percent: 76. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 17 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.005000, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.938750, Batt Percent: 76. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 18 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.003750, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.952500, Batt Percent: 76. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 19 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.002500, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.960000, Batt Percent: 75. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 20 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.001250, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.938750, Batt Percent: 75. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 21 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.998750, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 25 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.932500, Batt Percent: 75. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 22 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.998750, Batt Percent: 75. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.940000, Batt Percent: 75. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 23 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.995000, Batt Percent: 75. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.935000, Batt Percent: 74. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 24 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.993750, Batt Percent: 75. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 40 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.940000, Batt Percent: 74. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 25 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.991250, Batt Percent: 75. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.955000, Batt Percent: 74. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 26 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.990000, Batt Percent: 74. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.927500, Batt Percent: 74. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 27 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.988750, Batt Percent: 74. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.937500, Batt Percent: 74. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 28 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.986250, Batt Percent: 74. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 36 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.936250, Batt Percent: 73. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 29 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.985000, Batt Percent: 74. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.940000, Batt Percent: 73. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 30 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.981250, Batt Percent: 73. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 36 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.927500, Batt Percent: 73. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 31 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.981250, Batt Percent: 73. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.922500, Batt Percent: 73. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 32 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.980000, Batt Percent: 73. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.923750, Batt Percent: 72. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 33 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.977500, Batt Percent: 73. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.916250, Batt Percent: 72. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 34 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.975000, Batt Percent: 73. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 33 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.925000, Batt Percent: 72. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 35 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.975000, Batt Percent: 72. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.923750, Batt Percent: 72. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 36 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.973750, Batt Percent: 72. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.912500, Batt Percent: 71. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 37 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.972500, Batt Percent: 72. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.915000, Batt Percent: 71. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 38 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.971250, Batt Percent: 72. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.933750, Batt Percent: 71. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 39 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.970000, Batt Percent: 72. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.911250, Batt Percent: 71. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 40 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.967500, Batt Percent: 71. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.907500, Batt Percent: 71. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 41 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.963750, Batt Percent: 71. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.906250, Batt Percent: 70. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 42 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.965000, Batt Percent: 71. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.906250, Batt Percent: 70. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 43 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.962500, Batt Percent: 71. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.896250, Batt Percent: 70. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 44 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.960000, Batt Percent: 70. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.912500, Batt Percent: 70. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 45 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.960000, Batt Percent: 70. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.900000, Batt Percent: 70. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 46 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.957500, Batt Percent: 70. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.901250, Batt Percent: 69. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 47 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.955000, Batt Percent: 70. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.905000, Batt Percent: 69. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 48 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.955000, Batt Percent: 70. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.910000, Batt Percent: 69. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 49 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.953750, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.905000, Batt Percent: 69. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 50 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.952500, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.903750, Batt Percent: 68. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 51 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.951250, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.888750, Batt Percent: 68. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 52 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.948750, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.891250, Batt Percent: 68. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 53 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.947500, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.896250, Batt Percent: 68. I: WiFi Disconnect complete E: MQTT Disconnected from Broker Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 54 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.943750, Batt Percent: 68. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.896250, Batt Percent: 68. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 55 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.945000, Batt Percent: 68. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.892500, Batt Percent: 68. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 56 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.941250, Batt Percent: 68. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.880000, Batt Percent: 67. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 57 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.940000, Batt Percent: 68. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.863750, Batt Percent: 67. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 58 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.937500, Batt Percent: 68. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 67. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 59 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.935000, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.872500, Batt Percent: 67. I: WiFi Disconnect complete E: MQTT Disconnected from Broker Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 60 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.933750, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.868750, Batt Percent: 67. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 61 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.933750, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.881250, Batt Percent: 66. E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 62 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.931250, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.881250, Batt Percent: 66. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 63 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.926250, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.881250, Batt Percent: 66. E: MQTT Error: type=0x1 I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 64 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.926250, Batt Percent: 66. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.867500, Batt Percent: 66. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 65 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.925000, Batt Percent: 66. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.870000, Batt Percent: 66. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 66 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.922500, Batt Percent: 66. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.867500, Batt Percent: 65. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 67 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.920000, Batt Percent: 66. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.858750, Batt Percent: 65. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 68 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.918750, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.862500, Batt Percent: 65. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 69 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.916250, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 42 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.860000, Batt Percent: 64. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 70 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.915000, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.845000, Batt Percent: 64. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 71 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.911250, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.847500, Batt Percent: 64. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 72 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.910000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.861250, Batt Percent: 64. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 73 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.907500, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 63. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 74 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.905000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 75 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.903750, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.838750, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 76 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.897500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.857500, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 77 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 36 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.840000, Batt Percent: 62. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 78 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.841250, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 79 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.891250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.837500, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 80 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.887500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.837500, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 81 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.890000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.836250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 82 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.888750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.845000, Batt Percent: 61. E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 83 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.863750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.822500, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 84 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.832500, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 85 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.881250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: Uploading log file now. I: File counter not available in NVS, start with 1.