-------------------------------------- DEVICE LOGS --------------------------------------
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1785.
I: Going to sleep for 1785 seconds.
I: Before going to sleep, Batt V: 4.087500, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 313
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.088750, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.005000, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 314
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 315
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 316
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.087500, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 4.018750, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 317
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 318
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 319
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.016250, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 320
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1786.
I: Going to sleep for 1786 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 321
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1795.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 322
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.017500, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 323
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Sleep duration received from server: 1788.
I: Going to sleep for 1788 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 324
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Starting Firmware OTA update.

I: ESP_RST_SW: Software Reset occured after OTA updates.
Firmware process START.
I: Session number: 0
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 86.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 120.
I: Going to sleep for 120 seconds.
I: Before going to sleep, Batt V: 4.016250, Batt Percent: 86.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 1
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.066250, Batt Percent: 86.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 1762.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.015000, Batt Percent: 86.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 2
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 10 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 1788.
I: Going to sleep for 1788 seconds.
I: Before going to sleep, Batt V: 4.007500, Batt Percent: 86.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 3
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 251.
I: Going to sleep for 251 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 4
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 1783.
I: Going to sleep for 1783 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 5
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.085000, Batt Percent: 87.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 10 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.085000, Batt Percent: 87.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 6
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.085000, Batt Percent: 87.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 10 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 1786.
I: Going to sleep for 1786 seconds.
I: Before going to sleep, Batt V: 4.007500, Batt Percent: 87.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 7
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 8
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.085000, Batt Percent: 87.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 6 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.085000, Batt Percent: 87.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 9
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Changing WiFi details.
I: Going to sleep for 5 seconds.
I: Before going to sleep, Batt V: 4.086250, Batt Percent: 87.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 10
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 10 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 577.
I: Going to sleep for 577 seconds.
I: Before going to sleep, Batt V: 4.016250, Batt Percent: 87.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 11
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.065000, Batt Percent: 87.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 506.
I: Going to sleep for 506 seconds.
I: Before going to sleep, Batt V: 4.013750, Batt Percent: 87.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 12
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.062500, Batt Percent: 87.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 10 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 462.
I: Going to sleep for 462 seconds.
I: Before going to sleep, Batt V: 4.016250, Batt Percent: 87.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 13
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.063750, Batt Percent: 87.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Sleep duration received from server: 1785.
I: Going to sleep for 1785 seconds.
I: Before going to sleep, Batt V: 4.012500, Batt Percent: 87.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 14
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.087500, Batt Percent: 87.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 623.
I: Going to sleep for 623 seconds.
I: Before going to sleep, Batt V: 4.070000, Batt Percent: 87.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 15
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.086250, Batt Percent: 87.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Image downloaded successfully.
I: Start Timeout Timer for 3 minutes.
I: STATS (ms)
653 _wakeUp settings+send Buffer
2000 refresh time 
2653 total time in millis
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.960000, Batt Percent: 86.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 16
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.056250, Batt Percent: 86.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.008750, Batt Percent: 85.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 17
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.071250, Batt Percent: 86.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 9 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.008750, Batt Percent: 85.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 18
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.083750, Batt Percent: 85.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.001250, Batt Percent: 85.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 19
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.061250, Batt Percent: 85.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Display default image.
I: Download default image.
I: Start Timeout Timer for 3 minutes.
I: STATS (ms)
656 _wakeUp settings+send Buffer
2009 refresh time 
2665 total time in millis
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.961250, Batt Percent: 84.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 20
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.060000, Batt Percent: 84.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.007500, Batt Percent: 84.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 21
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.082500, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.007500, Batt Percent: 84.
E: MQTT Disconnected from Broker
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 22
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.081250, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.008750, Batt Percent: 84.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 23
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.081250, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.003750, Batt Percent: 84.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 24
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.080000, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.005000, Batt Percent: 84.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 25
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.081250, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.006250, Batt Percent: 84.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 26
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.078750, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.005000, Batt Percent: 84.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 27
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.077500, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.003750, Batt Percent: 83.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 28
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.077500, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.002500, Batt Percent: 83.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 29
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.075000, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.983750, Batt Percent: 83.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 30
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.076250, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.002500, Batt Percent: 83.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 31
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.075000, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.001250, Batt Percent: 83.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 32
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.001250, Batt Percent: 83.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 33
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.072500, Batt Percent: 84.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 9 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.993750, Batt Percent: 83.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 34
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.072500, Batt Percent: 83.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.998750, Batt Percent: 83.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 35
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.071250, Batt Percent: 83.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 4.000000, Batt Percent: 83.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 36
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.070000, Batt Percent: 83.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 10 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.996250, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 37
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.068750, Batt Percent: 83.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.988750, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 38
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.068750, Batt Percent: 83.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.993750, Batt Percent: 82.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 39
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.067500, Batt Percent: 83.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.987500, Batt Percent: 82.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 40
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.066250, Batt Percent: 83.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.985000, Batt Percent: 82.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 41
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.065000, Batt Percent: 83.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.973750, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 42
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.063750, Batt Percent: 82.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.976250, Batt Percent: 82.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 43
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.063750, Batt Percent: 82.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.971250, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 44
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.062500, Batt Percent: 82.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.970000, Batt Percent: 82.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 45
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.061250, Batt Percent: 82.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.966250, Batt Percent: 81.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 46
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.060000, Batt Percent: 82.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.973750, Batt Percent: 81.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 47
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.058750, Batt Percent: 82.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.971250, Batt Percent: 81.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 48
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.056250, Batt Percent: 82.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.970000, Batt Percent: 81.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 49
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.056250, Batt Percent: 81.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.961250, Batt Percent: 81.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 50
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.055000, Batt Percent: 81.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.963750, Batt Percent: 80.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 51
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.053750, Batt Percent: 81.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.971250, Batt Percent: 80.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 52
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.050000, Batt Percent: 81.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.971250, Batt Percent: 80.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 53
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.051250, Batt Percent: 81.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.973750, Batt Percent: 80.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 54
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.050000, Batt Percent: 81.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.961250, Batt Percent: 80.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 55
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.047500, Batt Percent: 81.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.961250, Batt Percent: 80.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 56
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 80.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.953750, Batt Percent: 79.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 57
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 80.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.947500, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 58
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.043750, Batt Percent: 80.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.958750, Batt Percent: 79.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 59
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.042500, Batt Percent: 80.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.965000, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 60
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.041250, Batt Percent: 80.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.946250, Batt Percent: 79.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 61
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.040000, Batt Percent: 79.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.938750, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 62
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.036250, Batt Percent: 79.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.946250, Batt Percent: 78.
E: Lost established connection, rescanning.
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 63
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.037500, Batt Percent: 79.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.958750, Batt Percent: 78.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 64
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.036250, Batt Percent: 79.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.945000, Batt Percent: 78.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 65
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.033750, Batt Percent: 79.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.955000, Batt Percent: 78.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 66
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.032500, Batt Percent: 78.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.940000, Batt Percent: 78.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 67
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.030000, Batt Percent: 78.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.955000, Batt Percent: 77.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 68
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.030000, Batt Percent: 78.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.918750, Batt Percent: 77.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 69
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 78.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.921250, Batt Percent: 77.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 70
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.026250, Batt Percent: 78.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.933750, Batt Percent: 77.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 71
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 77.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.933750, Batt Percent: 77.
E: MQTT Disconnected from Broker
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 72
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 77.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.940000, Batt Percent: 76.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 73
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.021250, Batt Percent: 77.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.938750, Batt Percent: 76.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 74
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 77.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.927500, Batt Percent: 76.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 75
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 77.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.922500, Batt Percent: 76.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 76
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.001250, Batt Percent: 76.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 31 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.920000, Batt Percent: 76.
E: MQTT Disconnected from Broker
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 77
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.015000, Batt Percent: 76.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.918750, Batt Percent: 75.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 78
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.016250, Batt Percent: 76.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.927500, Batt Percent: 75.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 79
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.012500, Batt Percent: 76.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 34 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.928750, Batt Percent: 75.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 80
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.012500, Batt Percent: 76.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.918750, Batt Percent: 75.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 81
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.010000, Batt Percent: 75.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 27 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.937500, Batt Percent: 75.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 82
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.008750, Batt Percent: 75.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 30 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.918750, Batt Percent: 74.
E: MQTT Disconnected from Broker
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 83
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.006250, Batt Percent: 75.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 33 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.901250, Batt Percent: 74.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 84
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.006250, Batt Percent: 75.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.932500, Batt Percent: 74.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 85
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.003750, Batt Percent: 75.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.916250, Batt Percent: 74.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 86
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.001250, Batt Percent: 74.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.901250, Batt Percent: 74.
E: MQTT Disconnected from Broker
I: Handling disconnect - will rescan and retry
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 87
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.998750, Batt Percent: 74.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 29 APs found.
I: WiFi connection failed or timed out.
I: Going to sleep for 60 seconds.
I: Before going to sleep, Batt V: 3.998750, Batt Percent: 74.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 88
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.000000, Batt Percent: 74.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
E: MQTT Error: type=0x1
E: MQTT Disconnected from Broker
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.901250, Batt Percent: 73.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 89
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.997500, Batt Percent: 74.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 31 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.908750, Batt Percent: 73.
E: MQTT Disconnected from Broker
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 90
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.997500, Batt Percent: 74.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.888750, Batt Percent: 73.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 91
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.995000, Batt Percent: 74.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 30 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.903750, Batt Percent: 73.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 92
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.993750, Batt Percent: 73.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.900000, Batt Percent: 72.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 93
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.962500, Batt Percent: 73.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 30 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.873750, Batt Percent: 72.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 94
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.991250, Batt Percent: 73.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.900000, Batt Percent: 72.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 95
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.987500, Batt Percent: 73.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.882500, Batt Percent: 72.
I: WiFi Disconnect complete
E: MQTT Disconnected from Broker
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 96
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.987500, Batt Percent: 72.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 29 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 3 minutes.
I: Connected to Broker.
I: Display default image.
I: Download default image.
E: Color parameter for BWR display is wrong or not valid.
I: Download default image again due to failure.
I: Start Timeout Timer for 3 minutes.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 508 seconds.
I: Before going to sleep, Batt V: 3.887500, Batt Percent: 71.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Session number: 97
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.986250, Batt Percent: 72.
I: Timeout timer Initialised
E: SSID not configured in NVS.
E: SSID not configured in NVS.
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: Uploading log file now.