-------------------------------------- DEVICE LOGS -------------------------------------- Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 0 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.048750, Batt Percent: 84. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 4.005000, Batt Percent: 84. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 1 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.040000, Batt Percent: 84. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 4.012500, Batt Percent: 83. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 2 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.043750, Batt Percent: 83. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 4.010000, Batt Percent: 83. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 3 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.010000, Batt Percent: 82. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 4.008750, Batt Percent: 82. E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 4 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.030000, Batt Percent: 82. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 4.005000, Batt Percent: 81. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 5 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.005000, Batt Percent: 81. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 4.005000, Batt Percent: 81. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 6 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.005000, Batt Percent: 81. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 4.002500, Batt Percent: 80. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 7 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.002500, Batt Percent: 80. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 4.001250, Batt Percent: 80. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 8 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.001250, Batt Percent: 80. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.997500, Batt Percent: 80. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 9 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.997500, Batt Percent: 79. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.996250, Batt Percent: 79. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 10 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.996250, Batt Percent: 79. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.993750, Batt Percent: 79. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 11 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.993750, Batt Percent: 79. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.991250, Batt Percent: 78. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 12 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.991250, Batt Percent: 78. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.991250, Batt Percent: 78. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 13 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.991250, Batt Percent: 78. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.990000, Batt Percent: 78. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 14 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.990000, Batt Percent: 77. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.987500, Batt Percent: 77. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 15 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.987500, Batt Percent: 77. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.987500, Batt Percent: 77. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 16 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.987500, Batt Percent: 77. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.982500, Batt Percent: 76. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 17 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.982500, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.981250, Batt Percent: 76. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 18 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.981250, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.978750, Batt Percent: 76. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 19 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.978750, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.978750, Batt Percent: 76. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 20 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.978750, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.975000, Batt Percent: 75. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 21 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.975000, Batt Percent: 75. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.972500, Batt Percent: 75. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 22 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.972500, Batt Percent: 75. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.970000, Batt Percent: 75. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 23 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.970000, Batt Percent: 75. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.971250, Batt Percent: 74. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 24 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.971250, Batt Percent: 74. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.967500, Batt Percent: 74. E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 25 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.967500, Batt Percent: 74. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.967500, Batt Percent: 74. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 26 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.967500, Batt Percent: 74. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.970000, Batt Percent: 74. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 27 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.010000, Batt Percent: 74. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.963750, Batt Percent: 73. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 28 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.963750, Batt Percent: 73. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.962500, Batt Percent: 73. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 29 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.006250, Batt Percent: 73. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.960000, Batt Percent: 73. E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 30 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.960000, Batt Percent: 73. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.956250, Batt Percent: 73. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 31 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.003750, Batt Percent: 73. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.956250, Batt Percent: 72. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 32 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.956250, Batt Percent: 72. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.952500, Batt Percent: 72. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 33 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.000000, Batt Percent: 72. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.950000, Batt Percent: 72. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 34 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.950000, Batt Percent: 72. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.950000, Batt Percent: 72. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 35 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.996250, Batt Percent: 72. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.947500, Batt Percent: 71. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 36 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.947500, Batt Percent: 71. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.931250, Batt Percent: 71. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 37 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.992500, Batt Percent: 71. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.941250, Batt Percent: 71. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 38 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.941250, Batt Percent: 71. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.928750, Batt Percent: 71. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 39 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.987500, Batt Percent: 71. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.925000, Batt Percent: 70. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 40 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.925000, Batt Percent: 70. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.941250, Batt Percent: 70. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 41 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.983750, Batt Percent: 70. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.942500, Batt Percent: 70. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 42 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.942500, Batt Percent: 70. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.922500, Batt Percent: 70. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 43 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.981250, Batt Percent: 70. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.940000, Batt Percent: 70. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 44 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.940000, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.942500, Batt Percent: 69. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 45 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.977500, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.921250, Batt Percent: 69. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 46 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.921250, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.928750, Batt Percent: 69. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 47 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.976250, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.920000, Batt Percent: 69. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 48 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.920000, Batt Percent: 69. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.922500, Batt Percent: 68. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 49 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.943750, Batt Percent: 68. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.917500, Batt Percent: 68. I: WiFi Disconnect complete E: MQTT Disconnected from Broker Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 50 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.917500, Batt Percent: 68. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.921250, Batt Percent: 68. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 51 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.932500, Batt Percent: 68. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.912500, Batt Percent: 68. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 52 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.912500, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.898750, Batt Percent: 67. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 53 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.898750, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.922500, Batt Percent: 67. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 54 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.922500, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.905000, Batt Percent: 67. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 55 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.905000, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.922500, Batt Percent: 67. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 56 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.922500, Batt Percent: 67. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.915000, Batt Percent: 66. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 57 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.915000, Batt Percent: 66. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.903750, Batt Percent: 66. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 58 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.903750, Batt Percent: 66. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.908750, Batt Percent: 66. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 59 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.908750, Batt Percent: 66. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.891250, Batt Percent: 66. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 60 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.891250, Batt Percent: 66. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.900000, Batt Percent: 66. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 61 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.900000, Batt Percent: 66. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.902500, Batt Percent: 65. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 62 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.902500, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.903750, Batt Percent: 65. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 63 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.903750, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.890000, Batt Percent: 65. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 64 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.890000, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.906250, Batt Percent: 64. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 65 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.906250, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.892500, Batt Percent: 64. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 66 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.898750, Batt Percent: 64. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 67 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.898750, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.892500, Batt Percent: 64. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 68 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.881250, Batt Percent: 64. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 69 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.881250, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.893750, Batt Percent: 63. E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 70 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.892500, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 71 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.883750, Batt Percent: 63. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 72 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 73 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.881250, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 74 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.881250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.878750, Batt Percent: 63. E: MQTT Disconnected from Broker Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 75 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.872500, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 76 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.872500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.867500, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 77 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.867500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.880000, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 78 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.873750, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 79 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. E: MQTT Disconnected from Broker I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.873750, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 80 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.860000, Batt Percent: 61. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 81 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.860000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 82 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.865000, Batt Percent: 61. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 83 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.865000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.860000, Batt Percent: 61. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 84 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.860000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.865000, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 85 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.865000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.866250, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 86 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.866250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.862500, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 87 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.862500, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.871250, Batt Percent: 60. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 88 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.871250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.855000, Batt Percent: 60. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 89 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.855000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 90 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.863750, Batt Percent: 59. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 91 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.863750, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.856250, Batt Percent: 59. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 92 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.856250, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.850000, Batt Percent: 59. I: WiFi Disconnect complete E: MQTT Disconnected from Broker Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 93 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.850000, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.852500, Batt Percent: 59. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 94 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.852500, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.847500, Batt Percent: 58. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 95 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.847500, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.848750, Batt Percent: 58. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 96 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.848750, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.848750, Batt Percent: 58. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 97 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.848750, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.845000, Batt Percent: 57. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 98 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 57. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.847500, Batt Percent: 57. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 99 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.847500, Batt Percent: 57. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.845000, Batt Percent: 57. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 100 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 57. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.833750, Batt Percent: 56. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 101 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.833750, Batt Percent: 56. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 56. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 102 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 56. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.835000, Batt Percent: 56. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 103 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.835000, Batt Percent: 56. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 55. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 104 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 55. E: Lost established connection, rescanning. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 105 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.841250, Batt Percent: 55. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 106 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.881250, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.810000, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 107 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.810000, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.832500, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 108 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.823750, Batt Percent: 54. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 109 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.823750, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.827500, Batt Percent: 54. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 110 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.875000, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.815000, Batt Percent: 54. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 111 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.815000, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.810000, Batt Percent: 54. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 112 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.872500, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.817500, Batt Percent: 53. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 113 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.817500, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.823750, Batt Percent: 53. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 114 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.830000, Batt Percent: 53. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 115 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.830000, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 52. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 116 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.865000, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.802500, Batt Percent: 52. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 117 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.802500, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.817500, Batt Percent: 51. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 118 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.861250, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.811250, Batt Percent: 51. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 119 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.811250, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.803750, Batt Percent: 51. I: WiFi Disconnect complete E: MQTT Disconnected from Broker I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 120 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.861250, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 50. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 121 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.816250, Batt Percent: 50. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 122 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.856250, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.805000, Batt Percent: 50. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 123 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.805000, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 49. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 124 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.855000, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.801250, Batt Percent: 49. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 125 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.801250, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.813750, Batt Percent: 48. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 126 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.850000, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.796250, Batt Percent: 48. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 127 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.796250, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 47. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 128 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.792500, Batt Percent: 47. E: MQTT Disconnected from Broker I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 129 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.802500, Batt Percent: 46. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 130 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.792500, Batt Percent: 46. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 131 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 10 seconds. I: Before going to sleep, Batt V: 3.796250, Batt Percent: 46. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.1 I: Session number: 132 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.838750, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: Uploading log file now. I: File counter not available in NVS, start with 1.