-------------------------------------- DEVICE LOGS -------------------------------------- Firmware process START. I: Firmware version number: 2.9 I: Session number: 0 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.765000, Batt Percent: 15. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Starting Firmware OTA update. I: Current Firmware version: 2.9. I: New Firmware Version: 2.9.3. I: Downloading new firmware version 2.9.3. I: Installing firmware 2.9.3. I: OTA update succesfull. I: ESP_RST_SW: Software Reset occured after OTA updates. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 0 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.743750, Batt Percent: 16. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/NaturalEnvironmentbwry1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1708 seconds. I: Before going to sleep, Batt V: 3.745000, Batt Percent: 16. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 1 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.801250, Batt Percent: 21. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Grounding_Technique2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 22. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 2 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.925000, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1756 seconds. I: Before going to sleep, Batt V: 3.896250, Batt Percent: 37. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 3 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.170000, Batt Percent: 68. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Be_still4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1755 seconds. I: Before going to sleep, Batt V: 4.158750, Batt Percent: 69. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 4 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.188750, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 4.170000, Batt Percent: 89. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 5 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.111250, Batt Percent: 95. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers_2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 4.197500, Batt Percent: 95. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 6 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.112500, Batt Percent: 93. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 4.190000, Batt Percent: 93. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 7 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.110000, Batt Percent: 91. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MatilderH/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 4.172500, Batt Percent: 91. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 8 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.111250, Batt Percent: 91. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR7/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1756 seconds. I: Before going to sleep, Batt V: 4.175000, Batt Percent: 91. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 9 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.112500, Batt Percent: 90. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR6/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.192500, Batt Percent: 91. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 10 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.113750, Batt Percent: 90. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1750 seconds. I: Before going to sleep, Batt V: 4.182500, Batt Percent: 90. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 11 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.112500, Batt Percent: 91. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1770. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 4.112500, Batt Percent: 91. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 12 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.181250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.128750, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 13 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 14 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 15 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 16 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 17 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 18 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 19 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 20 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 21 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.123750, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 22 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 23 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 24 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 25 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 26 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 27 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 28 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 29 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.123750, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 30 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 31 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 32 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 33 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 34 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 35 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 36 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 37 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 38 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.130000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.128750, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 39 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 40 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 41 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 42 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 43 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/11bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.128750, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 44 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/yogabmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 45 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Rest2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 46 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Parrot_bwry3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1765 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 47 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Grounding_Technique2/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 1 E: MQTT Error: type=0x1 E: MQTT Disconnected from Broker E: Publish failed. I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 48 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Grounding_Technique2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1569 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 49 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Be_still4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 50 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1717 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 51 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 52 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers_2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 53 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.130000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 42 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MatilderH/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1765 seconds. I: Before going to sleep, Batt V: 4.130000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 54 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Liking_urself/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 55 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1756 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 56 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.128750, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_travel2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 57 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy11/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1753 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 58 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Walk_stairs4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 59 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy8/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 60 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1741. I: Going to sleep for 1741 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 61 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 62 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 63 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 64 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 65 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 66 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 67 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 68 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 69 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 70 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 71 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 72 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 73 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 74 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 75 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 76 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 77 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 78 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 79 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 80 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. E: MQTT Error: type=0x1 E: MQTT Disconnected from Broker I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 81 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1688. I: Going to sleep for 1688 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 82 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 83 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 84 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 85 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.123750, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 86 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 87 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 49 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 88 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.176250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/4starwarsBWRY/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. E: MQTT Error: type=0x1 E: MQTT Disconnected from Broker E: Publish failed. E: Not connected to broker. Hence cannot publish. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 89 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mh5BWRYbmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1677 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 90 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/10bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 91 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Confident_Pandi/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1703 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 92 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 4.128750, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 93 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Stand_tall/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 94 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 95 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR5/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 96 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.123750, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR6/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 97 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR7/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 98 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 49 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers_2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 4.122500, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 99 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.125000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Walk_stairs4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 100 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_travel1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1755 seconds. I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 101 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 43 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_buoyancy1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 102 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Be_still4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1766 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 103 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1750 seconds. I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 104 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/11bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1757 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 105 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.123750, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mh4BWRYbmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 4.128750, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 106 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/3starwarsBWRY/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 107 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 40 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: Uploading log file now.