-------------------------------------- DEVICE LOGS --------------------------------------
I: Cleared log file. Starting from fresh after log file upload.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1751 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 344
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers_2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 345
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MatilderH/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 346
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR7/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1765 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 347
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy8/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 348
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Safety_first/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 349
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Rest2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 350
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/16BWRYbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 351
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1762.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 352
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 353
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 354
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 355
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 356
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 357
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 358
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 359
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 360
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 361
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 362
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1795.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 363
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 364
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 365
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 366
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 367
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 368
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 369
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 370
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 371
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 372
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 373
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/craftbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 374
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/yogabmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1770 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 375
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Rest2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 4.128750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 376
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/box6bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 377
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Safety_first/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 378
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Parrot_bwry3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1694 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 379
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Walk_stairs4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 380
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Be_still1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1757 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 381
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_travel2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1764 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 382
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Grounding_Technique2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1754 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 383
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_buoyancy1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1754 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 384
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Parrot_bwry3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 385
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Starting Firmware OTA update.
I: Current Firmware version: 2.9.3.
I: New Firmware Version: 2.9.4.
I: Downloading new firmware version 2.9.4.
I: Installing firmware 2.9.4.
I: OTA update succesfull.
E: Lost established connection, rescanning.
E: MQTT Disconnected from Broker

I: ESP_RST_SW: Software Reset occured after OTA updates.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 0
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mhBWRYbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1654 seconds.
I: Before going to sleep, Batt V: 4.128750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 1
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/5bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/7bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 3
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mh4BWRYbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 4
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mh5BWRYbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 5
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 6
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 7
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.122500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 8
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.197500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Stand_tall/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1751 seconds.
I: Before going to sleep, Batt V: 4.128750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 9
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MatilderH/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 10
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR5/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 11
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR6/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 12
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Liking_urself/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 13
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy8/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 14
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1751.
I: Going to sleep for 1751 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 15
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 16
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 17
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 18
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 19
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 20
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 21
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 22
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1795.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 23
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 24
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 25
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 26
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 27
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 28
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 29
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 30
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 31
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 32
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 33
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 34
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 35
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 36
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_buoyancy1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.122500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 37
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Be_still4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 38
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy10/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1764 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 39
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.122500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 40
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1764 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 41
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers_2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 42
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 44 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AdditionalNudgesBWRY8/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 43
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/GoldenfishPanel3BWRY1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 44
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/ActiveLifestylebwry2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1767 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 45
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CognitiveReframingbwry1/bwrY.h
E: Download failed: ESP_FAIL. Retry attempt: 1
I: Going to sleep for 60 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 46
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CognitiveReframingbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1566 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 47
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MentalHealthMeditationbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 48
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AddFewGreens/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1757 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 49
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CleanDishes1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1764 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 50
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Focusondoingbest1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 51
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/HeaterOffHeroOn/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1764 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 52
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Mandela1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 53
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PostBlitzDayNudgeBWRY2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 54
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/TheTallShipsRacesAberdeen2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 55
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/TheTallShipsRacesAberdeen3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 56
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/10/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 57
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/WallDisplay/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 58
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_21to30_Week3_3a/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 59
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/TheGobyFishStoryName/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 60
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Nessie31BWRY/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 61
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: Uploading log file now.