-------------------------------------- DEVICE LOGS --------------------------------------
I: Cleared log file. Starting from fresh after log file upload.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 297
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 298
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 299
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 300
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 301
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 302
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 303
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 304
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 305
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 306
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 307
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 308
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 309
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 310
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 311
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
E: MQTT Error: type=0x1
E: MQTT Disconnected from Broker
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 312
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1686.
I: Going to sleep for 1686 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 313
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 314
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 315
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 316
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 317
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 318
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 319
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 320
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 321
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 322
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 323
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 324
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 325
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 326
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 327
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 328
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 329
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 330
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 331
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 332
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AddFewGreensNG/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 333
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AdditionalNudgesBWRY-8/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 334
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CognitiveReframingbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 335
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/NaturalEnvironmentbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 336
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MentalHealthMeditationbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 337
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/ActiveLifestylebwry2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 338
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PersonalDevelopmentbwry3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1764 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 339
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CleanDishes1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 340
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Focusondoingbest1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1765 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 341
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/HeaterOffHeroOn/bwrY.h
E: Download failed: ESP_FAIL. Retry attempt: 2
E: MQTT Error: type=0x1
E: MQTT Disconnected from Broker
E: Publish failed.
I: Going to sleep for 60 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 342
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/HeaterOffHeroOn/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1595 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 343
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Mandela1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 344
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PostBlitzDayNudgeBWRY2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 345
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/WallDisplay/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 346
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/DanielleChangineerPoweringBolt/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1739 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 347
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week3_15b/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 348
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mhBWRYbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 349
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/11bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1767 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 350
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/12bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.121250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 351
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1768.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 352
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 353
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 354
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 355
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 356
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 357
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 358
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 359
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 360
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 361
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 362
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 363
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 364
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 365
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 366
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 367
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 368
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 369
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 370
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 371
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 372
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 373
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 374
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/12bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 375
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week7_2a/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1765 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 376
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week7_5b/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 377
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AddFewGreensNG/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 378
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AdditionalNudgesBWRY-8/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1770 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 379
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/GoldenfishPanel4BWRY2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1757 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 380
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/ConnectionConversationbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 381
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/ActiveLifestylebwry2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1767 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 382
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PersonalDevelopmentbwry3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 383
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CognitiveReframingbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 384
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MentalHealthMeditationbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 385
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/NaturalEnvironmentbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1767 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 386
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CABholiday3/bwrY.h
E: Download failed after 3 attempts: ESP_FAIL
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 387
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Focusondoingbest1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1714 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 388
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Mandela1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 389
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/TheTallShipsRacesAberdeen2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.128750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 390
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/SupportYellow/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1768 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 391
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/10/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 392
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/DanielleChangineerPoweringBolt/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 393
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week3_13b/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1702 seconds.
I: Before going to sleep, Batt V: 4.123750, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 394
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.128750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Solar2BWRY/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1736 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 395
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mhBWRYbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 396
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week5_2a/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1765 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 397
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Pandi6BWRY/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 398
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/12bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1765 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 399
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1766.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 400
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 401
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 402
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1795.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 403
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.126250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1795.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 4.126250, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 404
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.125000, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 405
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.127500, Batt Percent: 92.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 406
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: Uploading log file now.