-------------------------------------- DEVICE LOGS --------------------------------------
I: Cleared log file. Starting from fresh after log file upload.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers_2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.023750, Batt Percent: 83.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 113
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.053750, Batt Percent: 83.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Walk_stairs4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1774 seconds.
I: Before going to sleep, Batt V: 4.013750, Batt Percent: 83.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 114
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.053750, Batt Percent: 83.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_travel1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1757 seconds.
I: Before going to sleep, Batt V: 4.027500, Batt Percent: 83.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 115
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.052500, Batt Percent: 83.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_buoyancy1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1770 seconds.
I: Before going to sleep, Batt V: 3.996250, Batt Percent: 83.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 116
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.021250, Batt Percent: 83.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Be_still4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1772 seconds.
I: Before going to sleep, Batt V: 4.008750, Batt Percent: 83.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 117
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.051250, Batt Percent: 83.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1775 seconds.
I: Before going to sleep, Batt V: 4.025000, Batt Percent: 83.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 118
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.051250, Batt Percent: 83.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/11bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1773 seconds.
I: Before going to sleep, Batt V: 4.012500, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 119
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.050000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mh4BWRYbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.010000, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 120
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.050000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/3starwarsBWRY/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1769 seconds.
I: Before going to sleep, Batt V: 4.010000, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 121
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.048750, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 41 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mhBWRYbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.988750, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 122
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1747.
I: Going to sleep for 1747 seconds.
I: Before going to sleep, Batt V: 4.008750, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 123
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 42 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.046250, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 124
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.046250, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 125
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.046250, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 126
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.048750, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.035000, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 127
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.047500, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.013750, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 128
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.047500, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.016250, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 129
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.047500, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.047500, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 130
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.047500, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 39 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.047500, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 131
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.047500, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1795.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 4.047500, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 132
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.038750, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.038750, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 133
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 4.007500, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 134
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.015000, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 135
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 4.046250, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 136
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.047500, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.047500, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 137
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 4.046250, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 138
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.046250, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 139
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.032500, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 140
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 4.012500, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 141
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.045000, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 142
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.045000, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 143
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 4.045000, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 144
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1.
I: Going to sleep for 1 seconds.
I: Before going to sleep, Batt V: 4.045000, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 145
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1782.
I: Going to sleep for 1782 seconds.
I: Before going to sleep, Batt V: 4.045000, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 146
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.046250, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 2.
I: Going to sleep for 2 seconds.
I: Before going to sleep, Batt V: 4.008750, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 147
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.008750, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1779.
I: Going to sleep for 1779 seconds.
I: Before going to sleep, Batt V: 4.008750, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 148
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.043750, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1.
I: Going to sleep for 1 seconds.
I: Before going to sleep, Batt V: 4.010000, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 149
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.010000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1782.
I: Going to sleep for 1782 seconds.
I: Before going to sleep, Batt V: 4.010000, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 150
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.043750, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1.
I: Going to sleep for 1 seconds.
I: Before going to sleep, Batt V: 4.043750, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 151
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.043750, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1782.
I: Going to sleep for 1782 seconds.
I: Before going to sleep, Batt V: 4.043750, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 152
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1.
I: Going to sleep for 1 seconds.
I: Before going to sleep, Batt V: 4.045000, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 153
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1782.
I: Going to sleep for 1782 seconds.
I: Before going to sleep, Batt V: 4.022500, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 154
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 2.
I: Going to sleep for 2 seconds.
I: Before going to sleep, Batt V: 4.045000, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 155
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1781.
I: Going to sleep for 1781 seconds.
I: Before going to sleep, Batt V: 4.006250, Batt Percent: 82.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 156
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 2.
I: Going to sleep for 2 seconds.
I: Before going to sleep, Batt V: 4.045000, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 157
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.045000, Batt Percent: 82.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Safety_first/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1782 seconds.
I: Before going to sleep, Batt V: 4.013750, Batt Percent: 82.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 158
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.042500, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Confident_Pandi/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1772 seconds.
I: Before going to sleep, Batt V: 3.985000, Batt Percent: 81.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 159
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.041250, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Safety_first/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.991250, Batt Percent: 81.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 160
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.041250, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Health_check/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.998750, Batt Percent: 81.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 161
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.038750, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Rest2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1771 seconds.
I: Before going to sleep, Batt V: 3.998750, Batt Percent: 81.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 162
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.038750, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Walk_stairs4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1767 seconds.
I: Before going to sleep, Batt V: 3.987500, Batt Percent: 81.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 163
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.011250, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1770 seconds.
I: Before going to sleep, Batt V: 3.985000, Batt Percent: 81.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 164
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.038750, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy9/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1770 seconds.
I: Before going to sleep, Batt V: 3.985000, Batt Percent: 81.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 165
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.037500, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Stand_tall/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1765 seconds.
I: Before going to sleep, Batt V: 3.983750, Batt Percent: 81.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 166
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.036250, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MatilderH/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1770 seconds.
I: Before going to sleep, Batt V: 3.988750, Batt Percent: 80.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 167
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.036250, Batt Percent: 81.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Liking_urself/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1771 seconds.
I: Before going to sleep, Batt V: 3.996250, Batt Percent: 80.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 168
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.035000, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/box6bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1767 seconds.
I: Before going to sleep, Batt V: 4.005000, Batt Percent: 80.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 169
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.035000, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/yogabmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1764 seconds.
I: Before going to sleep, Batt V: 3.992500, Batt Percent: 80.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 170
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.035000, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 44 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/craftbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1757 seconds.
I: Before going to sleep, Batt V: 3.973750, Batt Percent: 80.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 171
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.033750, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Health_check/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1772 seconds.
I: Before going to sleep, Batt V: 4.000000, Batt Percent: 80.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 172
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.031250, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Safety_first/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1772 seconds.
I: Before going to sleep, Batt V: 3.993750, Batt Percent: 80.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 173
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.030000, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Rest2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1771 seconds.
I: Before going to sleep, Batt V: 3.975000, Batt Percent: 80.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 174
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.030000, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Grounding_Technique2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1773 seconds.
I: Before going to sleep, Batt V: 3.986250, Batt Percent: 80.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 175
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.030000, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1773 seconds.
I: Before going to sleep, Batt V: 3.985000, Batt Percent: 80.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 176
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mhBWRYbmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1766 seconds.
I: Before going to sleep, Batt V: 3.970000, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 177
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.011250, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1772.
I: Going to sleep for 1772 seconds.
I: Before going to sleep, Batt V: 4.011250, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 178
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.028750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 4.028750, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 179
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 80.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1796.
I: Going to sleep for 1796 seconds.
I: Before going to sleep, Batt V: 4.027500, Batt Percent: 80.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 180
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.015000, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 181
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 3.990000, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 182
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 3.983750, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 183
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.027500, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 184
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.027500, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 185
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.026250, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.026250, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 186
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.013750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 4.013750, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 187
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.026250, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1797.
I: Going to sleep for 1797 seconds.
I: Before going to sleep, Batt V: 3.997500, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 188
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1795.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 3.986250, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 189
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.026250, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.026250, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 190
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.027500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.027500, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 191
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.025000, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 192
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.026250, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.026250, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 193
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1.
I: Going to sleep for 1 seconds.
I: Before going to sleep, Batt V: 3.990000, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 194
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.990000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1782.
I: Going to sleep for 1782 seconds.
I: Before going to sleep, Batt V: 3.990000, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 195
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 2.
I: Going to sleep for 2 seconds.
I: Before going to sleep, Batt V: 3.981250, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 196
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.981250, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1782.
I: Going to sleep for 1782 seconds.
I: Before going to sleep, Batt V: 3.981250, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 197
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 4.025000, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 198
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.025000, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 199
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.025000, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 200
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 4.025000, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 201
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.025000, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 202
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 3.973750, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 203
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 3.991250, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 204
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: Sleep duration received from server: 1798.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 4.023750, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 205
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.022500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1800.
I: Going to sleep for 1800 seconds.
I: Before going to sleep, Batt V: 4.022500, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 206
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.022500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Sleep duration received from server: 1799.
I: Going to sleep for 1799 seconds.
I: Before going to sleep, Batt V: 4.022500, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 207
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AddFewGreensNG/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1798 seconds.
I: Before going to sleep, Batt V: 3.990000, Batt Percent: 79.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 208
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.022500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AdditionalNudgesBWRY-8/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1754 seconds.
I: Before going to sleep, Batt V: 3.962500, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 209
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.022500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MentalHealthMeditationbwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1765 seconds.
I: Before going to sleep, Batt V: 3.983750, Batt Percent: 79.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 210
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.021250, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CleanDishes1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1771 seconds.
I: Before going to sleep, Batt V: 3.945000, Batt Percent: 78.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 211
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/HeaterOffHeroOn/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1771 seconds.
I: Before going to sleep, Batt V: 3.963750, Batt Percent: 78.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 212
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Focusondoingbest1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1773 seconds.
I: Before going to sleep, Batt V: 3.976250, Batt Percent: 78.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 213
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.017500, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Mandela1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.980000, Batt Percent: 78.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 214
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.016250, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Mostpeoplehere/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.965000, Batt Percent: 78.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 215
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.017500, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PostBlitzDayNudgeBWRY2/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.963750, Batt Percent: 78.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 216
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.015000, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/TheTallShipsRacesAberdeen3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1764 seconds.
I: Before going to sleep, Batt V: 3.986250, Batt Percent: 78.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 217
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.015000, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: AP not found, will rescan after trying others
I: AP not found, will rescan after trying others
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week4_16a/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1742 seconds.
I: Before going to sleep, Batt V: 3.963750, Batt Percent: 78.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 218
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.012500, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Milo3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1774 seconds.
I: Before going to sleep, Batt V: 3.970000, Batt Percent: 77.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 219
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.013750, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Nessie4BWRY/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.953750, Batt Percent: 77.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 220
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.012500, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/WallDisplay/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1770 seconds.
I: Before going to sleep, Batt V: 3.960000, Batt Percent: 77.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 221
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.008750, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PersonalDevelopmentbwry3/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1773 seconds.
I: Before going to sleep, Batt V: 3.960000, Batt Percent: 77.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 222
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.010000, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Start Timeout Timer for 1 minute.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/ActiveLifestylebwry1/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1765 seconds.
I: Before going to sleep, Batt V: 3.963750, Batt Percent: 77.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.3
I: Session number: 223
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.008750, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: Uploading log file now.