-------------------------------------- DEVICE LOGS -------------------------------------- I: Cleared log file. Starting from fresh after log file upload. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AddFewGreensNG/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.771250, Batt Percent: 50. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 383 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.836250, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AdditionalNudgesBWRY-8/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 3.792500, Batt Percent: 50. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 384 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.835000, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CognitiveReframingbwry1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1766 seconds. I: Before going to sleep, Batt V: 3.791250, Batt Percent: 50. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 385 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.836250, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 49 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/NaturalEnvironmentbwry1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.786250, Batt Percent: 50. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 386 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.835000, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MentalHealthMeditationbwry1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1774 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 49. E: Lost established connection, rescanning. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 387 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.833750, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/ActiveLifestylebwry2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 49. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 388 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.816250, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PersonalDevelopmentbwry3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.785000, Batt Percent: 49. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 389 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.831250, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CleanDishes1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.782500, Batt Percent: 48. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 390 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.806250, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 49 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Focusondoingbest1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.775000, Batt Percent: 48. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 391 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.828750, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/HeaterOffHeroOn/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.786250, Batt Percent: 48. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 392 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.830000, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Mandela1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.803750, Batt Percent: 48. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 393 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.828750, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PostBlitzDayNudgeBWRY2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1775 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 48. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 394 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.827500, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/WallDisplay/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.788750, Batt Percent: 47. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 395 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.826250, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 49 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/DanielleChangineerPoweringBolt/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 1 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 47. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 396 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.825000, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/DanielleChangineerPoweringBolt/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1549 seconds. I: Before going to sleep, Batt V: 3.775000, Batt Percent: 46. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 397 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.827500, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week3_15b/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.777500, Batt Percent: 46. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 398 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.823750, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mhBWRYbmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.775000, Batt Percent: 46. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 399 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.823750, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/11bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.782500, Batt Percent: 46. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 400 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/12bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1772 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 46. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 401 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1749. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.822500, Batt Percent: 46. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 402 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.787500, Batt Percent: 45. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 403 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.823750, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 2. I: Going to sleep for 2 seconds. I: Before going to sleep, Batt V: 3.823750, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 404 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.820000, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.820000, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 405 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.822500, Batt Percent: 45. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 406 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 407 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 2. I: Going to sleep for 2 seconds. I: Before going to sleep, Batt V: 3.822500, Batt Percent: 45. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 408 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1776. I: Going to sleep for 1776 seconds. I: Before going to sleep, Batt V: 3.802500, Batt Percent: 45. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 409 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.821250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 2. I: Going to sleep for 2 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 410 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.821250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 411 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.821250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 45. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 412 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.821250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 49 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 413 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.786250, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 414 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.786250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.786250, Batt Percent: 45. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 415 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.821250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.790000, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 416 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.790000, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.790000, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 417 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.821250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 2. I: Going to sleep for 2 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 418 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.808750, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 419 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.821250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1790. I: Going to sleep for 1790 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 45. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 420 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.820000, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.820000, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 421 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.820000, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1788. I: Going to sleep for 1788 seconds. I: Before going to sleep, Batt V: 3.820000, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 422 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 423 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 424 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 425 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.771250, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 426 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 2. I: Going to sleep for 2 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 427 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 44. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 428 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 429 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 430 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 2. I: Going to sleep for 2 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 431 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1775. I: Going to sleep for 1775 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 432 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.796250, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.796250, Batt Percent: 44. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 433 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.796250, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1776. I: Going to sleep for 1776 seconds. I: Before going to sleep, Batt V: 3.796250, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 434 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 3. I: Going to sleep for 3 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 435 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 436 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.817500, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 437 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 44. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 438 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.806250, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/12bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.755000, Batt Percent: 44. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 439 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.816250, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week7_2a/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1773 seconds. I: Before going to sleep, Batt V: 3.758750, Batt Percent: 43. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 440 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.816250, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week7_5b/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 3.761250, Batt Percent: 43. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 441 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.815000, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AddFewGreensNG/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.735000, Batt Percent: 43. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 442 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.816250, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/AdditionalNudgesBWRY-8/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1774 seconds. I: Before going to sleep, Batt V: 3.795000, Batt Percent: 43. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 443 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.815000, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/GoldenfishPanel4BWRY2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1776 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 42. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 444 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.813750, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/ConnectionConversationbwry1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.762500, Batt Percent: 42. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 445 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/ActiveLifestylebwry2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 42. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 446 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.813750, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PersonalDevelopmentbwry3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 42. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 447 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.811250, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CognitiveReframingbwry1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1772 seconds. I: Before going to sleep, Batt V: 3.745000, Batt Percent: 42. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 448 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.810000, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MentalHealthMeditationbwry1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 42. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 449 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.810000, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/NaturalEnvironmentbwry1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 41. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 450 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.801250, Batt Percent: 41. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/CABholiday3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.757500, Batt Percent: 41. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 451 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.807500, Batt Percent: 41. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Focusondoingbest1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1773 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 41. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 452 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.807500, Batt Percent: 41. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Mandela1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1766 seconds. I: Before going to sleep, Batt V: 3.770000, Batt Percent: 41. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 453 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.807500, Batt Percent: 41. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/TheTallShipsRacesAberdeen2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 40. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 454 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.806250, Batt Percent: 40. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/SupportYellow/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 40. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 455 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.806250, Batt Percent: 40. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/10/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1765 seconds. I: Before going to sleep, Batt V: 3.742500, Batt Percent: 40. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 456 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.806250, Batt Percent: 40. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/DanielleChangineerPoweringBolt/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.751250, Batt Percent: 40. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 457 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.805000, Batt Percent: 40. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week3_13b/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1773 seconds. I: Before going to sleep, Batt V: 3.752500, Batt Percent: 40. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 458 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.805000, Batt Percent: 40. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Solar2BWRY/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1774 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 39. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 459 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.802500, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mhBWRYbmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 3.763750, Batt Percent: 39. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 460 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.803750, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/IC_Week5_2a/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1755 seconds. I: Before going to sleep, Batt V: 3.735000, Batt Percent: 39. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 461 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Pandi6BWRY/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 39. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 462 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.802500, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/12bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 39. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 463 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.801250, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1765. I: Going to sleep for 1765 seconds. I: Before going to sleep, Batt V: 3.801250, Batt Percent: 39. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 464 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.800000, Batt Percent: 39. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 465 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 3.800000, Batt Percent: 39. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 466 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.801250, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 3.801250, Batt Percent: 39. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 467 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.788750, Batt Percent: 39. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 468 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.761250, Batt Percent: 39. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 469 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 38. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 470 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 3.800000, Batt Percent: 38. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 471 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.801250, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.801250, Batt Percent: 38. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 472 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 38. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 473 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 38. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 474 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.751250, Batt Percent: 38. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 475 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.751250, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.751250, Batt Percent: 38. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 476 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.747500, Batt Percent: 38. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 477 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.747500, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1775. I: Going to sleep for 1775 seconds. I: Before going to sleep, Batt V: 3.747500, Batt Percent: 38. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 478 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 3. I: Going to sleep for 3 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 38. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 479 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1777. I: Going to sleep for 1777 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 38. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 480 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 38. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 481 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 38. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 482 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.797500, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.797500, Batt Percent: 38. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 483 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.797500, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.750000, Batt Percent: 38. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 484 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 38. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 485 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 38. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 486 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.760000, Batt Percent: 38. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 487 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.797500, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 3.758750, Batt Percent: 37. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 488 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1800. I: Going to sleep for 1800 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 37. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 489 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.797500, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.797500, Batt Percent: 37. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 490 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.796250, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 3.796250, Batt Percent: 37. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 491 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.796250, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: Uploading log file now.