-------------------------------------- DEVICE LOGS -------------------------------------- I: Cleared log file. Starting from fresh after log file upload. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.897500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 595 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.897500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.897500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 596 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.897500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.897500, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 597 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.897500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.897500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 598 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.897500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.897500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 599 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.885000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.885000, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 600 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.885000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.885000, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 601 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.896250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.882500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 602 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.882500, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 603 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.896250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.847500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 604 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.847500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.847500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 605 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.896250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 8. I: Going to sleep for 8 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 606 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 607 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.897500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.882500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 608 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.882500, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 609 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.896250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.882500, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 610 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.882500, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 611 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 7. I: Going to sleep for 7 seconds. I: Before going to sleep, Batt V: 3.871250, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 612 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.871250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.871250, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 613 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 3. I: Going to sleep for 3 seconds. I: Before going to sleep, Batt V: 3.875000, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 614 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.875000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.875000, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 615 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.895000, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 616 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.893750, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 617 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.895000, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 618 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.895000, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 619 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.895000, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 620 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.891250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1779. I: Going to sleep for 1779 seconds. I: Before going to sleep, Batt V: 3.891250, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 621 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.893750, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 622 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.883750, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 623 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.893750, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 624 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.875000, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 625 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.893750, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 626 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.880000, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 627 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.895000, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 628 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 629 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.893750, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 630 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1780. I: Going to sleep for 1780 seconds. I: Before going to sleep, Batt V: 3.870000, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 631 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.893750, Batt Percent: 63. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 632 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.893750, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 633 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 7. I: Going to sleep for 7 seconds. I: Before going to sleep, Batt V: 3.892500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 634 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.866250, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 635 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 7. I: Going to sleep for 7 seconds. I: Before going to sleep, Batt V: 3.892500, Batt Percent: 63. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 636 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/craftbmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.870000, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 637 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/yogabmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1774 seconds. I: Before going to sleep, Batt V: 3.873750, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 638 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.891250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Rest2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1773 seconds. I: Before going to sleep, Batt V: 3.872500, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 639 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.891250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/box6bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1776 seconds. I: Before going to sleep, Batt V: 3.872500, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 640 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.891250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Safety_first/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1777 seconds. I: Before going to sleep, Batt V: 3.875000, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 641 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.891250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Parrot_bwry3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.866250, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 642 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.890000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Walk_stairs4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1777 seconds. I: Before going to sleep, Batt V: 3.867500, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 643 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.888750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Be_still1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1772 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 644 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.891250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_travel2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.867500, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 645 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.888750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Grounding_Technique2/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1753 seconds. I: Before going to sleep, Batt V: 3.866250, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 646 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.887500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_buoyancy1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 3.866250, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 647 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.888750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Parrot_bwry3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1765 seconds. I: Before going to sleep, Batt V: 3.861250, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.3 I: Session number: 648 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.887500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Starting Firmware OTA update. I: Current Firmware version: 2.9.3. I: New Firmware Version: 2.9.4. I: Downloading new firmware version 2.9.4. I: Installing firmware 2.9.4. I: OTA update succesfull. I: ESP_RST_SW: Software Reset occured after OTA updates. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 0 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.862500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mhBWRYbmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1674 seconds. I: Before going to sleep, Batt V: 3.845000, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 1 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.885000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/5bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1775 seconds. I: Before going to sleep, Batt V: 3.871250, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.886250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/7bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1772 seconds. I: Before going to sleep, Batt V: 3.866250, Batt Percent: 62. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 3 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mh4BWRYbmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 3.858750, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 4 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.866250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/mh5BWRYbmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.861250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 5 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy1/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 1 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 6 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1599 seconds. I: Before going to sleep, Batt V: 3.852500, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 7 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 8 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.881250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Beavers3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 9 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Stand_tall/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1775 seconds. I: Before going to sleep, Batt V: 3.855000, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 10 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/MatilderH/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1765 seconds. I: Before going to sleep, Batt V: 3.842500, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 11 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR5/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.857500, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 12 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.881250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSQR6/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1772 seconds. I: Before going to sleep, Batt V: 3.855000, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 13 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Liking_urself/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.871250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 14 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/JSMy8/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1776 seconds. I: Before going to sleep, Batt V: 3.855000, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 15 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1770. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 3.878750, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 16 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1. I: Going to sleep for 1 seconds. I: Before going to sleep, Batt V: 3.861250, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 17 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.861250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.861250, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 18 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 19 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1780. I: Going to sleep for 1780 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 20 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 21 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 22 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.878750, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 23 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.875000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1780. I: Going to sleep for 1780 seconds. I: Before going to sleep, Batt V: 3.875000, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 24 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 25 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.872500, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 26 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 27 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.857500, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 28 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 29 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.862500, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 30 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 31 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.836250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 32 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 33 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.860000, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 34 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 35 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.857500, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 36 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 37 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 38 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 39 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 40 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.865000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.865000, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 41 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.865000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.865000, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 42 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.865000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.865000, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 43 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.865000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.865000, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 44 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 4. I: Going to sleep for 4 seconds. I: Before going to sleep, Batt V: 3.863750, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 45 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.863750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.863750, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 46 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 47 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 48 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.858750, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 49 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.858750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.858750, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 50 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.862500, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 51 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.862500, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.862500, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 52 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.872500, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.841250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 53 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.841250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.841250, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 54 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 55 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.851250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1781. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 56 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 5. I: Going to sleep for 5 seconds. I: Before going to sleep, Batt V: 3.873750, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 57 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.872500, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Sleep duration received from server: 1782. I: Going to sleep for 1782 seconds. I: Before going to sleep, Batt V: 3.872500, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 58 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.875000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Sleep duration received from server: 6. I: Going to sleep for 6 seconds. I: Before going to sleep, Batt V: 3.875000, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 59 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Team_buoyancy1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1781 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 60 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.871250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: Start Timeout Timer for 1 minute. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Be_still4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 61 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.871250, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: Uploading log file now.