-------------------------------------- DEVICE LOGS --------------------------------------
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 0
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.877500, Batt Percent: 62.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.843750, Batt Percent: 62.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 1
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.872500, Batt Percent: 62.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260619_062429_30964530/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.837500, Batt Percent: 62.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 2
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.886250, Batt Percent: 62.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.850000, Batt Percent: 62.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 3
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.883750, Batt Percent: 62.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260619_073251_a490ac08/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.847500, Batt Percent: 61.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 4
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.881250, Batt Percent: 61.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260619_085448_32de36dd/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.850000, Batt Percent: 61.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 5
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.861250, Batt Percent: 61.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260619_085735_889362ed/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.843750, Batt Percent: 60.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 6
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.876250, Batt Percent: 60.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.845000, Batt Percent: 60.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 7
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.876250, Batt Percent: 60.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260619_092726_ae975576/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.841250, Batt Percent: 60.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 8
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.875000, Batt Percent: 60.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260619_101912_1bc93143/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.841250, Batt Percent: 60.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 9
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.876250, Batt Percent: 60.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Changing WiFi details.
I: Going to sleep for 5 seconds.
I: Before going to sleep, Batt V: 3.866250, Batt Percent: 60.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 10
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.866250, Batt Percent: 60.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260619_104045_e33c6343/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.840000, Batt Percent: 59.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 11
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.870000, Batt Percent: 59.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260619_104045_e33c6343/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.838750, Batt Percent: 59.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 12
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.870000, Batt Percent: 59.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.856250, Batt Percent: 58.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 13
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.870000, Batt Percent: 59.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Changing WiFi details.
I: Going to sleep for 5 seconds.
I: Before going to sleep, Batt V: 3.858750, Batt Percent: 58.
E: Lost established connection, rescanning.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 14
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.858750, Batt Percent: 58.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.838750, Batt Percent: 58.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 15
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.871250, Batt Percent: 59.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260619_123439_1659c9c8/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.832500, Batt Percent: 58.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 16
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.870000, Batt Percent: 59.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.831250, Batt Percent: 58.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 17
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.866250, Batt Percent: 58.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.826250, Batt Percent: 57.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 18
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.867500, Batt Percent: 58.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.825000, Batt Percent: 58.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 19
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.866250, Batt Percent: 58.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.828750, Batt Percent: 57.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 20
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.860000, Batt Percent: 57.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.828750, Batt Percent: 56.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 21
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.862500, Batt Percent: 57.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.827500, Batt Percent: 56.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 22
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.860000, Batt Percent: 56.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.827500, Batt Percent: 56.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 23
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.860000, Batt Percent: 56.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.823750, Batt Percent: 56.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 24
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.860000, Batt Percent: 56.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.816250, Batt Percent: 55.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 25
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.858750, Batt Percent: 55.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.822500, Batt Percent: 55.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 26
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.856250, Batt Percent: 55.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.821250, Batt Percent: 55.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 27
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.855000, Batt Percent: 55.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.822500, Batt Percent: 55.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 28
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.855000, Batt Percent: 55.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.822500, Batt Percent: 55.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 29
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.855000, Batt Percent: 55.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.821250, Batt Percent: 55.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 30
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.852500, Batt Percent: 55.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.821250, Batt Percent: 54.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 31
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.852500, Batt Percent: 54.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.816250, Batt Percent: 54.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 32
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.851250, Batt Percent: 54.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.815000, Batt Percent: 54.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 33
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.848750, Batt Percent: 54.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.815000, Batt Percent: 53.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 34
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.848750, Batt Percent: 53.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.805000, Batt Percent: 53.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 35
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.847500, Batt Percent: 53.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.803750, Batt Percent: 53.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 36
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.845000, Batt Percent: 53.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.811250, Batt Percent: 52.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 37
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.845000, Batt Percent: 52.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 31 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.805000, Batt Percent: 52.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 38
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.845000, Batt Percent: 52.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 36 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.807500, Batt Percent: 51.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 39
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.843750, Batt Percent: 51.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 44 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.806250, Batt Percent: 51.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 40
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.842500, Batt Percent: 51.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 27 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.800000, Batt Percent: 51.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 41
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.841250, Batt Percent: 51.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 27 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.806250, Batt Percent: 50.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 42
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.837500, Batt Percent: 50.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 27 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.806250, Batt Percent: 50.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 43
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.837500, Batt Percent: 50.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.803750, Batt Percent: 50.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 44
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.835000, Batt Percent: 50.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.797500, Batt Percent: 50.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 45
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.837500, Batt Percent: 50.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.800000, Batt Percent: 49.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 46
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.833750, Batt Percent: 49.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.801250, Batt Percent: 49.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 47
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.832500, Batt Percent: 49.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.801250, Batt Percent: 48.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 48
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.832500, Batt Percent: 48.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.802500, Batt Percent: 48.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 49
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.831250, Batt Percent: 48.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.798750, Batt Percent: 48.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 50
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.830000, Batt Percent: 48.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.796250, Batt Percent: 48.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 51
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.828750, Batt Percent: 47.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.800000, Batt Percent: 47.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 52
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.827500, Batt Percent: 47.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.795000, Batt Percent: 46.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 53
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.827500, Batt Percent: 46.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.787500, Batt Percent: 46.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 54
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.822500, Batt Percent: 46.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.788750, Batt Percent: 46.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 55
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.823750, Batt Percent: 46.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 25 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.788750, Batt Percent: 45.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 56
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.806250, Batt Percent: 45.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.796250, Batt Percent: 45.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 57
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.795000, Batt Percent: 45.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.790000, Batt Percent: 44.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 58
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.818750, Batt Percent: 44.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.788750, Batt Percent: 44.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 59
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.818750, Batt Percent: 44.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.781250, Batt Percent: 44.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 60
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.817500, Batt Percent: 44.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.781250, Batt Percent: 43.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 61
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.813750, Batt Percent: 43.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260622_052731_8010a8e6/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.773750, Batt Percent: 43.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 62
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.812500, Batt Percent: 42.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260622_060408_c328b819/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.777500, Batt Percent: 42.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 63
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.812500, Batt Percent: 42.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 8 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260622_070610_a47492fd/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.770000, Batt Percent: 42.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 64
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.808750, Batt Percent: 41.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 6 APs found.
I: WiFi connection failed or timed out.
I: Going to sleep for 60 seconds.
I: Before going to sleep, Batt V: 3.783750, Batt Percent: 41.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 65
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.808750, Batt Percent: 41.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260622_073031_223a97bf/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.770000, Batt Percent: 41.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 66
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.808750, Batt Percent: 41.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.770000, Batt Percent: 40.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 67
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.806250, Batt Percent: 40.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.770000, Batt Percent: 40.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 68
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.800000, Batt Percent: 40.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260622_090748_c14e6c46/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.761250, Batt Percent: 39.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 69
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.803750, Batt Percent: 39.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.763750, Batt Percent: 39.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 70
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.801250, Batt Percent: 39.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.767500, Batt Percent: 39.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 71
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.800000, Batt Percent: 39.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.760000, Batt Percent: 38.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 72
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.797500, Batt Percent: 38.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.762500, Batt Percent: 38.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 73
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.780000, Batt Percent: 38.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.762500, Batt Percent: 37.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 74
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.780000, Batt Percent: 37.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.765000, Batt Percent: 37.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 75
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.795000, Batt Percent: 37.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.762500, Batt Percent: 37.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 76
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.793750, Batt Percent: 36.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.753750, Batt Percent: 36.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 77
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.791250, Batt Percent: 36.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.756250, Batt Percent: 36.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 78
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.791250, Batt Percent: 36.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.758750, Batt Percent: 35.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 79
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.787500, Batt Percent: 35.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.760000, Batt Percent: 35.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 80
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.787500, Batt Percent: 35.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.746250, Batt Percent: 34.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 81
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.785000, Batt Percent: 34.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.750000, Batt Percent: 34.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 82
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.771250, Batt Percent: 33.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.758750, Batt Percent: 33.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 83
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.781250, Batt Percent: 33.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260623_060205_812d9196/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.751250, Batt Percent: 32.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 84
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.780000, Batt Percent: 32.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 7 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260623_071058_9c083168/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.735000, Batt Percent: 32.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 85
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.780000, Batt Percent: 31.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 8 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.747500, Batt Percent: 31.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 86
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.776250, Batt Percent: 31.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.740000, Batt Percent: 31.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 87
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.773750, Batt Percent: 30.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.740000, Batt Percent: 30.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 88
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.772500, Batt Percent: 29.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260623_122727_7be3e530/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.721250, Batt Percent: 29.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 89
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.770000, Batt Percent: 29.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.727500, Batt Percent: 29.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 90
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.748750, Batt Percent: 29.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.737500, Batt Percent: 28.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 91
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.766250, Batt Percent: 27.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.732500, Batt Percent: 27.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 92
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.762500, Batt Percent: 26.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.721250, Batt Percent: 26.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 93
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.762500, Batt Percent: 26.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.720000, Batt Percent: 26.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 94
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.760000, Batt Percent: 25.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.726250, Batt Percent: 25.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 95
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.758750, Batt Percent: 25.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.723750, Batt Percent: 24.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 96
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.756250, Batt Percent: 24.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 32 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.718750, Batt Percent: 24.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 97
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.752500, Batt Percent: 23.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 32 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.711250, Batt Percent: 23.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 98
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.751250, Batt Percent: 23.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.712500, Batt Percent: 22.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 99
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.751250, Batt Percent: 22.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.718750, Batt Percent: 22.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 100
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.748750, Batt Percent: 21.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.700000, Batt Percent: 21.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 101
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.745000, Batt Percent: 20.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.716250, Batt Percent: 20.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 102
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.743750, Batt Percent: 20.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260624_053555_31349f97/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.698750, Batt Percent: 19.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 103
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.742500, Batt Percent: 19.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 9 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/tmptest/BWRY/75/IT001_20260624_053555_31349f97/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.698750, Batt Percent: 19.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 104
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.731250, Batt Percent: 19.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 8 APs found.
I: WiFi connected successfully.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Clear screen operation.
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Display going to Deep Sleep.
I: Going to sleep without informing server. e-pd might have issues.
I: Going to sleep for 5000 seconds.
I: Before going to sleep, Batt V: 3.703750, Batt Percent: 18.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.8.2
I: Session number: 105
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.735000, Batt Percent: 18.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: Uploading log file now.
I: File counter not available in NVS, start with 1.