-------------------------------------- DEVICE LOGS -------------------------------------- I: Cleared log file. Starting from fresh after log file upload. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0130_1/003_01_0130_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 561 seconds. I: Before going to sleep, Batt V: 4.160000, Batt Percent: 14. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 3580 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.170000, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0140_1/003_01_0140_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1741 seconds. I: Before going to sleep, Batt V: 4.181250, Batt Percent: 35. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 3581 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.185000, Batt Percent: 76. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0043/003_02_0043_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 4.172500, Batt Percent: 76. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 3582 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.186250, Batt Percent: 91. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0044/003_02_0044_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1765 seconds. I: Before going to sleep, Batt V: 4.196250, Batt Percent: 91. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 3583 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.113750, Batt Percent: 93. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0045/003_02_0045_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 4.176250, Batt Percent: 93. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 3584 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.186250, Batt Percent: 94. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0046/003_02_0046_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1744 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 94. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 3585 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.126250, Batt Percent: 93. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0047/003_02_0047_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.125000, Batt Percent: 93. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 3586 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.127500, Batt Percent: 93. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 4.132500, Batt Percent: 93. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 3587 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.122500, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Starting Firmware OTA update. I: Current Firmware version: 2.9.4. I: New Firmware Version: 2.9.8. I: Downloading new firmware version 2.9.8. I: Installing firmware 2.9.8. I: OTA update succesfull. E: MQTT Disconnected from Broker Firmware process START. I: ESP_RST_SW: Software Reset occured after OTA updates. I: Firmware version number: 2.9.8 I: Session number: 0 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.095000, Batt Percent: 92. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1655 seconds. I: Before going to sleep, Batt V: 4.090000, Batt Percent: 92. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 1 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.121250, Batt Percent: 91. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 4.086250, Batt Percent: 91. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 2 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.118750, Batt Percent: 91. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1755 seconds. I: Before going to sleep, Batt V: 4.087500, Batt Percent: 91. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 3 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.118750, Batt Percent: 91. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 4.075000, Batt Percent: 91. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 4 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.115000, Batt Percent: 90. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.076250, Batt Percent: 90. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 5 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.116250, Batt Percent: 90. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0056_1/003_02_0056_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1757 seconds. I: Before going to sleep, Batt V: 4.076250, Batt Percent: 90. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 6 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.113750, Batt Percent: 90. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0057_1/003_02_0057_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.077500, Batt Percent: 90. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 7 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.113750, Batt Percent: 90. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0058_1/003_02_0058_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.098750, Batt Percent: 90. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 8 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.112500, Batt Percent: 90. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0059_1/003_02_0059_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 4.082500, Batt Percent: 90. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 9 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.110000, Batt Percent: 90. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0070_1/003_02_0070_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 4.072500, Batt Percent: 90. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 10 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.108750, Batt Percent: 90. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0071_1/003_02_0071_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 4.073750, Batt Percent: 90. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 11 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.106250, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0072_1/003_02_0072_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.077500, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 12 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.108750, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0073_1/003_02_0073_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.068750, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 13 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.108750, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 4.076250, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 14 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.106250, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Shelly6-10/Shelly3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.080000, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 15 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.105000, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/SteveFireWardenStory2/FinalDay3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.080000, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 16 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.105000, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1766 seconds. I: Before going to sleep, Batt V: 4.077500, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 17 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.103750, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1769. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.077500, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 18 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.103750, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.103750, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 19 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.102500, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 4.102500, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 20 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.102500, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.092500, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 21 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.102500, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.083750, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 22 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.088750, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.088750, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 23 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.102500, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.102500, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 24 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.103750, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 49 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.103750, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 25 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.101250, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.101250, Batt Percent: 89. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 26 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.100000, Batt Percent: 89. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.068750, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 27 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.100000, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.076250, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 28 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.101250, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.101250, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 29 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.101250, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.101250, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 30 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.101250, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.101250, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 31 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.101250, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.101250, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 32 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.098750, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 43 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 4.067500, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 33 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.098750, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.078750, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 34 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.098750, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.098750, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 35 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.098750, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 27 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.098750, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 36 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.097500, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.097500, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 37 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.098750, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.098750, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 38 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.098750, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Tribute_to_Noran/Noran023/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.068750, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 39 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.096250, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_3/The_Lazy_Crow_3/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 1 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 4.065000, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 40 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.097500, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_3/The_Lazy_Crow_3/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 2 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 4.097500, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 41 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.095000, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_3/The_Lazy_Crow_3/bwrY.h E: Download failed after 3 attempts: ESP_FAIL I: Going to sleep for 1600 seconds. I: Before going to sleep, Batt V: 4.095000, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 42 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.097500, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_Apple_Choice/The_Apple_Choice_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.050000, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 43 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.096250, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/SteveFireWardenStory2/FinalDay3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.056250, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 44 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.095000, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/SteveFireWardenStory1/SteveFireWardenText3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.037500, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 45 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.095000, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/StarFishPaula/StarFishPaula3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 4.067500, Batt Percent: 88. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 46 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.095000, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Shelly6-10/Shelly3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 4.058750, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 47 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.093750, Batt Percent: 88. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Indian_Space_Research_Organisation/Indian_Space_Research_Organisation_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.082500, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 48 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.092500, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0120/004_02_0120_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.061250, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 49 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.091250, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0120/004_01_0120_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.058750, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 50 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.090000, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0111/004_01_0111_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.060000, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 51 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.088750, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0110/004_01_0110_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.066250, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 52 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.090000, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. W: WiFi Disconnected, reason: AUTH_EXPIRE I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_3/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 1 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 4.061250, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 53 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.087500, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. E: MQTT Error: type=0x1 I: Going to sleep without informing server. e-pd might have issues. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 4.058750, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 54 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.087500, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1592 seconds. I: Before going to sleep, Batt V: 4.058750, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 55 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.086250, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0120_1/003_01_0120_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 4.056250, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 56 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.085000, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0110_1/003_01_0110_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 4.048750, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 57 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.086250, Batt Percent: 87. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0130_1/003_01_0130_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 4.043750, Batt Percent: 87. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 58 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.083750, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0140_1/003_01_0140_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.052500, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 59 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.083750, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 4.040000, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 60 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.082500, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1766 seconds. I: Before going to sleep, Batt V: 4.050000, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 61 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.082500, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.047500, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 62 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.082500, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.051250, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 63 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.081250, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 4.061250, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 64 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.080000, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0056_1/003_02_0056_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.051250, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 65 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.080000, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0057_1/003_02_0057_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.047500, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 66 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.078750, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0058_1/003_02_0058_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 4.048750, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 67 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.065000, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0059_1/003_02_0059_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 4.048750, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 68 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.076250, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1768. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.076250, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 69 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.077500, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.038750, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 70 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.077500, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.056250, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 71 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.077500, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 4.077500, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 72 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.077500, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.077500, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 73 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.076250, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.076250, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 74 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.076250, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.040000, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 75 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.077500, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 4.057500, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 76 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.075000, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.075000, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 77 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.076250, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 42 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.076250, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 78 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.076250, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 4.076250, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 79 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.075000, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 40 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.075000, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 80 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.076250, Batt Percent: 86. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.053750, Batt Percent: 86. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 81 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.075000, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 4.062500, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 82 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.075000, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 4.075000, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 83 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.075000, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.075000, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 84 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.073750, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.073750, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 85 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.073750, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.043750, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 86 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.073750, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 4.050000, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 87 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.073750, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 4.073750, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 88 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.073750, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 4.073750, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 89 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.073750, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 4.073750, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 90 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.072500, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 4.038750, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 91 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.071250, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 4.036250, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 92 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.071250, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 9 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 4.032500, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 93 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.070000, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1757 seconds. I: Before going to sleep, Batt V: 4.040000, Batt Percent: 85. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 94 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 4.071250, Batt Percent: 85. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: Uploading log file now.