-------------------------------------- DEVICE LOGS -------------------------------------- I: Cleared log file. Starting from fresh after log file upload. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.836250, Batt Percent: 55. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 492 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0110/004_01_0110_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 55. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 493 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0111/004_01_0111_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.823750, Batt Percent: 55. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 494 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.855000, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0120/004_01_0120_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.837500, Batt Percent: 55. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 495 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.817500, Batt Percent: 55. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 496 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.852500, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0120/004_02_0120_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.830000, Batt Percent: 55. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 497 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Shelly6-10/Shelly3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 54. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 498 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.852500, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0058_1/004_02_0058_03_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 54. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 499 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.851250, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0067/004_02_0067_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.816250, Batt Percent: 54. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 500 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.851250, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0068/004_02_0068_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 54. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 501 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.848750, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 54. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 502 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.848750, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0070/004_02_0070_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.822500, Batt Percent: 54. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 503 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.850000, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0071/004_02_0071_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.822500, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 504 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.847500, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0072/004_02_0072_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1748 seconds. I: Before going to sleep, Batt V: 3.815000, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 505 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0073/004_02_0073_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.826250, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 506 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.847500, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0074/004_02_0074_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.816250, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 507 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0075/004_02_0075_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 3.820000, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 508 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1758. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 509 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 510 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 27 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 511 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 3.837500, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 512 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1800. I: Going to sleep for 1800 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 513 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 514 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 3.845000, Batt Percent: 53. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 515 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.845000, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 516 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 35 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 3.823750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 517 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.836250, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 518 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 519 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 520 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 521 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 522 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 3.820000, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 523 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.833750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 524 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 525 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1799. I: Going to sleep for 1799 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 526 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 527 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 528 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 529 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 3.842500, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 530 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.842500, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 531 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.843750, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1798. I: Going to sleep for 1798 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 52. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 532 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.841250, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.817500, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 533 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 534 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.835000, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 3.835000, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 535 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.840000, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1797. I: Going to sleep for 1797 seconds. I: Before going to sleep, Batt V: 3.840000, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 536 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0044/003_02_0044_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.801250, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 537 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.841250, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0045/003_02_0045_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1771 seconds. I: Before going to sleep, Batt V: 3.806250, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 538 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.840000, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0046/003_02_0046_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 539 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.838750, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0047/003_02_0047_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.817500, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 540 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.841250, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 541 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.827500, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.806250, Batt Percent: 51. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 542 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.837500, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.790000, Batt Percent: 50. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 543 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.838750, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.811250, Batt Percent: 50. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 544 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.838750, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.802500, Batt Percent: 50. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 545 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.836250, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.796250, Batt Percent: 50. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 546 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.836250, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 25 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0056_1/003_02_0056_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 50. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 547 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.835000, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0057_1/003_02_0057_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.817500, Batt Percent: 50. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 548 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.833750, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0058_1/003_02_0058_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1757 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 49. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 549 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.835000, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0059_1/003_02_0059_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1766 seconds. I: Before going to sleep, Batt V: 3.805000, Batt Percent: 49. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 550 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.833750, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0070_1/003_02_0070_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.805000, Batt Percent: 49. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 551 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.822500, Batt Percent: 49. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 552 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.831250, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.826250, Batt Percent: 48. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 553 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.830000, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0071/004_02_0071_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.787500, Batt Percent: 48. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 554 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.830000, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_3/Akber_Birbal_3_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 3.807500, Batt Percent: 48. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 555 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.830000, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Coming_Soon/Coming_Soon_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 48. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 556 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.828750, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_3/The_Lazy_Crow_3/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 1 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 48. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 557 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.827500, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_3/The_Lazy_Crow_3/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 2 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 3.801250, Batt Percent: 48. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 558 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.827500, Batt Percent: 48. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_3/The_Lazy_Crow_3/bwrY.h E: Download failed after 3 attempts: ESP_FAIL I: Going to sleep for 1601 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 48. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 559 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.828750, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Tribute_to_Noran/Noran023/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 47. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 560 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.827500, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_Apple_Choice/The_Apple_Choice_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.791250, Batt Percent: 47. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 561 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.827500, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Rhyme_Hindi_Aloo/Rhyme_Hindi_Aloo_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 3.802500, Batt Percent: 47. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 562 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.827500, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Rhyme_English_Humpty/Rhyme_English_Humpty_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 3.795000, Batt Percent: 47. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 563 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.826250, Batt Percent: 47. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ProactiveCareFrog/FrogSpasuper3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1766 seconds. I: Before going to sleep, Batt V: 3.791250, Batt Percent: 46. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 564 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.825000, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/BoilingFrogPaula/BoilingFrogPaula3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 3.792500, Batt Percent: 46. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 565 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.823750, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_3/Akber_Birbal_3_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.791250, Batt Percent: 46. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 566 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.825000, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_4/Akber_Birbal_4_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 46. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 567 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.823750, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0101/004_02_0101_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.797500, Batt Percent: 46. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 568 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 46. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_03/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.782500, Batt Percent: 46. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 569 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.822500, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0140_1/003_01_0140_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1754 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 45. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 570 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.821250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0130_1/003_01_0130_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 3.787500, Batt Percent: 45. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 571 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.821250, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0120_1/003_01_0120_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 3.796250, Batt Percent: 45. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 572 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.820000, Batt Percent: 45. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0110_1/003_01_0110_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1769 seconds. I: Before going to sleep, Batt V: 3.800000, Batt Percent: 45. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 573 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.820000, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0046/003_02_0046_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.785000, Batt Percent: 44. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 574 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.820000, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0044/003_02_0044_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.788750, Batt Percent: 44. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 575 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.817500, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.788750, Batt Percent: 44. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 576 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0047/003_02_0047_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1755 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 44. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 577 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.818750, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 25 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.791250, Batt Percent: 44. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 578 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.816250, Batt Percent: 44. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1768 seconds. I: Before going to sleep, Batt V: 3.782500, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 579 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.816250, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1757 seconds. I: Before going to sleep, Batt V: 3.805000, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 580 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.815000, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1753 seconds. I: Before going to sleep, Batt V: 3.793750, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 581 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.815000, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1757 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 582 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.815000, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0056_1/003_02_0056_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1766 seconds. I: Before going to sleep, Batt V: 3.777500, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 583 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.813750, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0057_1/003_02_0057_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 584 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0058_1/003_02_0058_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1765 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 585 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0059_1/003_02_0059_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 586 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0070_1/003_02_0070_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1770 seconds. I: Before going to sleep, Batt V: 3.782500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 587 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0071_1/003_02_0071_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 588 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.810000, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0072_1/003_02_0072_3/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1767 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 589 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.810000, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: Uploading log file now.