-------------------------------------- DEVICE LOGS -------------------------------------- I: Cleared log file. Starting from fresh after log file upload. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/LeoKael2/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 279 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 35. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1086 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 235. I: Going to sleep for 235 seconds. I: Before going to sleep, Batt V: 3.785000, Batt Percent: 34. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1087 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.783750, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 34. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1088 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.771250, Batt Percent: 34. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1089 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.785000, Batt Percent: 34. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1090 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.785000, Batt Percent: 34. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1091 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/LeoKael3/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 34. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1092 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.783750, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 234. I: Going to sleep for 234 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 34. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1093 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.783750, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 34. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1094 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.782500, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.782500, Batt Percent: 34. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1095 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.783750, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 34. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1096 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.785000, Batt Percent: 34. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1097 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.783750, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/LeoKael4/bwrY.h E: Download failed: ESP_FAIL E: Failed to download image. I: Going to sleep for 288 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 34. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1098 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.782500, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/LeoKael4/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 34. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1099 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 231. I: Going to sleep for 231 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 34. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1100 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 34. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1101 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 33. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1102 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.782500, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 288. I: Going to sleep for 288 seconds. I: Before going to sleep, Batt V: 3.782500, Batt Percent: 33. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1103 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.782500, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/LeoKael5/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 33. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1104 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 232. I: Going to sleep for 232 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 33. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1105 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 33. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1106 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 33. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1107 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 33. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1108 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 33. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1109 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/HBDAbhijit/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 33. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1110 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 233. I: Going to sleep for 233 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 33. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1111 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 33. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1112 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 33. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1113 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 33. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1114 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 33. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1115 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PandiEnamelCastle1/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.763750, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1116 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 237. I: Going to sleep for 237 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 32. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1117 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1118 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 32. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1119 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 32. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1120 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1121 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PandiEnamelCastle2/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.762500, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1122 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.776250, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 234. I: Going to sleep for 234 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1123 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 32. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1124 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1125 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 32. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1126 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 32. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1127 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PandiEnamelCastle3/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.758750, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1128 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.775000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 233. I: Going to sleep for 233 seconds. I: Before going to sleep, Batt V: 3.775000, Batt Percent: 32. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1129 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.776250, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.762500, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1130 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.777500, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1131 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.777500, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1132 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 32. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1133 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PandiEnamelCastle5/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.755000, Batt Percent: 32. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1134 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.775000, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 235. I: Going to sleep for 235 seconds. I: Before going to sleep, Batt V: 3.775000, Batt Percent: 31. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1135 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.771250, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.771250, Batt Percent: 31. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1136 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.776250, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 31. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1137 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 288. I: Going to sleep for 288 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 31. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1138 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.776250, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 31. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1139 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PandiEnamelCastle41/bwrY.h E: Download failed: ESP_FAIL E: Failed to download image. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.760000, Batt Percent: 31. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1140 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/PandiEnamelCastle41/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 267 seconds. I: Before going to sleep, Batt V: 3.757500, Batt Percent: 31. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1141 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.772500, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 232. I: Going to sleep for 232 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 31. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1142 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 31. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1143 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.775000, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.775000, Batt Percent: 31. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1144 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 31. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1145 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.775000, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/The_Sleepy_Alarm_Clock_1/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.755000, Batt Percent: 31. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1146 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 233. I: Going to sleep for 233 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 30. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1147 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 30. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1148 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.760000, Batt Percent: 30. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1149 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.772500, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 288. I: Going to sleep for 288 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 30. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1150 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 30. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1151 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/The_Sleepy_Alarm_Clock_2/bwrY.h E: Download failed: ESP_FAIL E: Failed to download image. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.758750, Batt Percent: 30. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1152 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/The_Sleepy_Alarm_Clock_2/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.755000, Batt Percent: 30. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1153 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 234. I: Going to sleep for 234 seconds. I: Before going to sleep, Batt V: 3.770000, Batt Percent: 30. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1154 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.772500, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 30. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1155 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.772500, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 30. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1156 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.771250, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.771250, Batt Percent: 30. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1157 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/The_Sleepy_Alarm_Clock_3/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 30. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1158 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 233. I: Going to sleep for 233 seconds. I: Before going to sleep, Batt V: 3.757500, Batt Percent: 30. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1159 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.770000, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1160 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.771250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.771250, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1161 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.771250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.743750, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1162 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.771250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 9 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.771250, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1163 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.771250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/The_Sleepy_Alarm_Clock_4/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.743750, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1164 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.761250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 9 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 232. I: Going to sleep for 232 seconds. I: Before going to sleep, Batt V: 3.761250, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1165 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 8 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.770000, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1166 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.772500, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1167 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.755000, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1168 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.770000, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1169 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.768750, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 9 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/The_Sleepy_Alarm_Clock_5/bwrY.h I: Image downloaded successfully. I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.755000, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1170 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.768750, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 8 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 234. I: Going to sleep for 234 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1171 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 8 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1172 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.768750, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1173 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.757500, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1174 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1175 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Display default image. I: Download default image. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/NudgeBank/BWRY/75/Xaglabs_1/bwrY.h I: Start Timeout Timer for 3 minutes. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.752500, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1176 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.768750, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 235. I: Going to sleep for 235 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1177 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1178 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1179 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.756250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1180 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 29. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1181 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 29. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1182 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1183 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.748750, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1184 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.768750, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1185 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1186 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.768750, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.752500, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1187 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1188 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1189 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.753750, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1190 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1191 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1192 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.751250, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1193 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1194 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connection failed or timed out. E: Failed to connect to WiFi after 3 attempts I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1195 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 285. I: Going to sleep for 285 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1196 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1197 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.765000, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1198 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.763750, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1199 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1200 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.763750, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1201 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.763750, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1202 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.746250, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1203 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.763750, Batt Percent: 28. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1204 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.765000, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1205 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.765000, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.751250, Batt Percent: 28. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1206 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 27. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1207 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 27. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1208 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.750000, Batt Percent: 27. E: Lost established connection, rescanning. I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1209 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 27. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1210 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.765000, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 27. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1211 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 287. I: Going to sleep for 287 seconds. I: Before going to sleep, Batt V: 3.750000, Batt Percent: 27. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1212 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 3 minutes. I: Connected to Broker. I: Sleep duration received from server: 286. I: Going to sleep for 286 seconds. I: Before going to sleep, Batt V: 3.763750, Batt Percent: 27. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.7.3 I: Session number: 1213 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.765000, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: Uploading log file now.