-------------------------------------- DEVICE LOGS -------------------------------------- I: Cleared log file. Starting from fresh after log file upload. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0110/004_01_0110_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1745 seconds. I: Before going to sleep, Batt V: 3.817500, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 304 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.916250, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0111/004_01_0111_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.822500, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 305 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.917500, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0120/004_01_0120_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.816250, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 306 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.915000, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.787500, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 307 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.915000, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0067/004_02_0067_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.795000, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 308 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.913750, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0068/004_02_0068_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.857500, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 309 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.913750, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Jasper_Dark/JasperDarkBWRY1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.832500, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 310 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.912500, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1762. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.835000, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 311 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.912500, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.912500, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 312 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.911250, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.911250, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 313 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.912500, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.912500, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 314 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.912500, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.912500, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 315 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.912500, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.912500, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 316 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.911250, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.911250, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 317 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.911250, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1788. I: Going to sleep for 1788 seconds. I: Before going to sleep, Batt V: 3.856250, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 318 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.911250, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.863750, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 319 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.911250, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 33 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 320 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.911250, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 321 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.910000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.910000, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 322 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.910000, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 36 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.910000, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 323 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.908750, Batt Percent: 65. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.908750, Batt Percent: 65. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 324 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.910000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.910000, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 325 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.908750, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 36 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.908750, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 326 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.910000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.910000, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 327 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.910000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 27 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1787. I: Going to sleep for 1787 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 328 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.908750, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.847500, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 329 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.908750, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.850000, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 330 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.870000, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 331 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.907500, Batt Percent: 64. I: Timeout timer Initialised I: Entered Multi-Function menu. I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ManRowing/ManRowing_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 656 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 332 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.908750, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1733 seconds. I: Before going to sleep, Batt V: 3.848750, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 333 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.906250, Batt Percent: 64. I: Timeout timer Initialised I: Entered Multi-Function menu. I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiLuggage/Pandi_Luggage1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 575 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 334 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.905000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0075/004_02_0075_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 335 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.905000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0082/004_02_0082_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 336 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.905000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.821250, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 337 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.905000, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0110/004_02_0110_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.852500, Batt Percent: 64. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 338 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.902500, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0120/004_02_0120_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.811250, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 339 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.901250, Batt Percent: 64. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Cookies/ByteBearCcookies4bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.813750, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 340 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.901250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Flashlight/ByteBearFlashlight4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.787500, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 341 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.901250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Garden/ByteBearGarden1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.811250, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 342 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.900000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/CPR_Story/CPR_Story_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.805000, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 343 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.898750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerBW/FarmerBW1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1750 seconds. I: Before going to sleep, Batt V: 3.793750, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 344 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.898750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiEnd/FarmerPandiEnd1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.777500, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 345 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.861250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Happily_Growing_Plant/Happily_Growing_Plants_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 346 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.897500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Healthy_Eyes/Healthy_Eyes_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.815000, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 347 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.897500, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Indian_Space_Research_Organisation/Indian_Space_Research_Organisation_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.801250, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 348 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.896250, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ManRowing/ManRowing_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.771250, Batt Percent: 63. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 349 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelBWRY/PandiEnamel1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.807500, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 350 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.893750, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelKing/PandiEnamelCastle1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 351 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.895000, Batt Percent: 63. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiLuggage/Pandi_Luggage1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.811250, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 352 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiToothMulticolors/PandiTooth1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.795000, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 353 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.892500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWaitingBench/PandiWaitingBench1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.800000, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 354 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.890000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Prince/Prince1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 355 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.890000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Rhyme_Hindi_Aloo/Rhyme_Hindi_Aloo_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.792500, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 356 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.868750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_1/The_Lazy_Crow_1/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 1 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 3.868750, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 357 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.888750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_1/The_Lazy_Crow_1/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 2 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 3.830000, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 358 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.890000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_1/The_Lazy_Crow_1/bwrY.h E: Download failed after 3 attempts: ESP_FAIL I: Going to sleep for 1597 seconds. I: Before going to sleep, Batt V: 3.783750, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 359 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.890000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Tribute_to_Noran/Noran021/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.832500, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 360 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.888750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. W: WiFi Disconnected, reason: 4WAY_HANDSHAKE_TIMEOUT W: WiFi Disconnected, reason: 4WAY_HANDSHAKE_TIMEOUT W: WiFi Disconnected, reason: 4WAY_HANDSHAKE_TIMEOUT W: WiFi Disconnected, reason: 4WAY_HANDSHAKE_TIMEOUT I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_Apple_Choice/The_Apple_Choice_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1731 seconds. I: Before going to sleep, Batt V: 3.797500, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 361 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.887500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/SteveFireWardenStory2/FinalDay1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1766 seconds. I: Before going to sleep, Batt V: 3.798750, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 362 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.887500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1760. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.887500, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 363 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.886250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1789. I: Going to sleep for 1789 seconds. I: Before going to sleep, Batt V: 3.830000, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 364 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.886250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.860000, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 365 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.886250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.886250, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 366 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.886250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1790. I: Going to sleep for 1790 seconds. I: Before going to sleep, Batt V: 3.886250, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 367 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.887500, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 40 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.887500, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 368 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.885000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.885000, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 369 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.885000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.885000, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 370 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.885000, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.885000, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 371 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 372 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.886250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1789. I: Going to sleep for 1789 seconds. I: Before going to sleep, Batt V: 3.813750, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 373 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.886250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 43 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.811250, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 374 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1790. I: Going to sleep for 1790 seconds. I: Before going to sleep, Batt V: 3.883750, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 375 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.883750, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 376 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 42 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.883750, Batt Percent: 62. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 377 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 40 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.883750, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 378 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.882500, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 379 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 35 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1789. I: Going to sleep for 1789 seconds. I: Before going to sleep, Batt V: 3.813750, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 380 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.805000, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 381 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.807500, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 382 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.816250, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 383 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/StarFishPaula/StarFishPaula1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.785000, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 384 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/SteveFireWardenStory1/SteveFireWardenText1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.790000, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 385 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/SteveFireWardenStory2/FinalDay1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.787500, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 386 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Tribute_to_Noran/Noran021/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.785000, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 387 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.851250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_Apple_Choice/The_Apple_Choice_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.790000, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 388 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ProactiveCareFrog/FrogSpasuper1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 389 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode1_Treasure/LeoTreasure1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.788750, Batt Percent: 61. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 390 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode2_TheLostEmeraldParrot/LeoParrot1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 60. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 391 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.875000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode3_RedPuma/LeoRedPuma1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.778750, Batt Percent: 60. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 392 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.875000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode4_Butterfly/LeoButterfly1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.782500, Batt Percent: 60. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 393 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.875000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode5_Kael/LeoKael1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 60. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 394 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode6_Desert/LeoDesert1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 60. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 395 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Happily_Growing_Plant/Happily_Growing_Plants_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 59. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 396 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Healthy_Eyes/Healthy_Eyes_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 3.758750, Batt Percent: 59. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 397 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.872500, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Helping_Grandma/Helping_Grandma_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.772500, Batt Percent: 59. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 398 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.868750, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Indian_Space_Research_Organisation/Indian_Space_Research_Organisation_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 59. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 399 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/CPR_Story/CPR_Story_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 59. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 400 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_3/Akber_Birbal_3_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 59. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 401 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0067/004_02_0067_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.745000, Batt Percent: 58. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 402 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.868750, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1750 seconds. I: Before going to sleep, Batt V: 3.770000, Batt Percent: 58. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 403 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.867500, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0070/004_02_0070_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 3.792500, Batt Percent: 58. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 404 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.867500, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 27 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0071/004_02_0071_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 58. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 405 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.867500, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: Uploading log file now.