-------------------------------------- DEVICE LOGS -------------------------------------- I: Cleared log file. Starting from fresh after log file upload. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1742. I: Going to sleep for 1742 seconds. I: Before going to sleep, Batt V: 3.815000, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 509 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.815000, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1788. I: Going to sleep for 1788 seconds. I: Before going to sleep, Batt V: 3.815000, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 510 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.815000, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.815000, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 511 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.816250, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.718750, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 512 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.813750, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.737500, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 513 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.813750, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 514 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.786250, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1790. I: Going to sleep for 1790 seconds. I: Before going to sleep, Batt V: 3.786250, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 515 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.813750, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.813750, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 516 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.813750, Batt Percent: 43. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 36 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.813750, Batt Percent: 43. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 517 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 518 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.813750, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1790. I: Going to sleep for 1790 seconds. I: Before going to sleep, Batt V: 3.813750, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 519 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 35 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 520 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.813750, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 35 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.757500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 521 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.755000, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 522 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.745000, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 523 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.811250, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 36 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.761250, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 524 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.756250, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 36 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 525 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 526 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 33 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 527 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1790. I: Going to sleep for 1790 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 528 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.811250, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.811250, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 529 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.812500, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1790. I: Going to sleep for 1790 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 530 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.811250, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.752500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 531 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.811250, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.761250, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 532 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.811250, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.757500, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 533 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.786250, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.786250, Batt Percent: 41. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 534 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.808750, Batt Percent: 41. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 25 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 41. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 535 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.810000, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.810000, Batt Percent: 42. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 536 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.810000, Batt Percent: 42. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0044/003_02_0044_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.755000, Batt Percent: 41. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 537 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.807500, Batt Percent: 41. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 27 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0045/003_02_0045_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.717500, Batt Percent: 41. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 538 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.808750, Batt Percent: 41. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0046/003_02_0046_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.722500, Batt Percent: 41. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 539 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.808750, Batt Percent: 41. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0047/003_02_0047_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.748750, Batt Percent: 40. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 540 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.807500, Batt Percent: 40. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1754 seconds. I: Before going to sleep, Batt V: 3.711250, Batt Percent: 40. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 541 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.805000, Batt Percent: 40. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1746 seconds. I: Before going to sleep, Batt V: 3.712500, Batt Percent: 40. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 542 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.803750, Batt Percent: 40. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.686250, Batt Percent: 40. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 543 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.806250, Batt Percent: 40. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.750000, Batt Percent: 39. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 544 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.802500, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.712500, Batt Percent: 39. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 545 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.803750, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.716250, Batt Percent: 39. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 546 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.803750, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0056_1/003_02_0056_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.686250, Batt Percent: 39. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 547 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.802500, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0057_1/003_02_0057_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.721250, Batt Percent: 39. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 548 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.801250, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0058_1/003_02_0058_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.717500, Batt Percent: 39. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 549 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.802500, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0059_1/003_02_0059_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.721250, Batt Percent: 39. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 550 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0070_1/003_02_0070_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.731250, Batt Percent: 38. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 551 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.707500, Batt Percent: 38. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 552 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1753 seconds. I: Before going to sleep, Batt V: 3.693750, Batt Percent: 38. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 553 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0071/004_02_0071_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.721250, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 554 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.797500, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_3/Akber_Birbal_3_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.698750, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 555 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.797500, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Coming_Soon/Coming_Soon_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.706250, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 556 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_1/The_Lazy_Crow_1/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 1 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 3.777500, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 557 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.795000, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_1/The_Lazy_Crow_1/bwrY.h E: Download failed: ESP_FAIL. Retry attempt: 2 I: Going to sleep for 60 seconds. I: Before going to sleep, Batt V: 3.742500, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 558 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.760000, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_1/The_Lazy_Crow_1/bwrY.h E: Download failed after 3 attempts: ESP_FAIL I: Going to sleep for 1595 seconds. I: Before going to sleep, Batt V: 3.727500, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 559 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.796250, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Tribute_to_Noran/Noran021/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1788 seconds. I: Before going to sleep, Batt V: 3.718750, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 560 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.795000, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_Apple_Choice/The_Apple_Choice_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1745 seconds. I: Before going to sleep, Batt V: 3.715000, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 561 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 33 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Rhyme_Hindi_Aloo/Rhyme_Hindi_Aloo_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.717500, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 562 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Rhyme_English_Humpty/Rhyme_English_Humpty_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.740000, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 563 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ProactiveCareFrog/FrogSpasuper1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.707500, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 564 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 33 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/BoilingFrogPaula/BoilFrogPaula1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.710000, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 565 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.791250, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_3/Akber_Birbal_3_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.742500, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 566 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.790000, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 42 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_4/Akber_Birbal_4_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.675000, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 567 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.790000, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0101/004_02_0101_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.667500, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 568 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.788750, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.688750, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 569 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.788750, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0140_1/003_01_0140_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.692500, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 570 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.787500, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0130_1/003_01_0130_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.707500, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 571 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.787500, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0120_1/003_01_0120_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.677500, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 572 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.787500, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 35 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0110_1/003_01_0110_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.730000, Batt Percent: 34. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 573 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.786250, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0046/003_02_0046_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.691250, Batt Percent: 34. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 574 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0044/003_02_0044_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.662500, Batt Percent: 34. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 575 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 36 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.701250, Batt Percent: 33. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 576 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.782500, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 35 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0047/003_02_0047_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.697500, Batt Percent: 33. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 577 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.783750, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.698750, Batt Percent: 33. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 578 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.783750, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.692500, Batt Percent: 33. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 579 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.782500, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.687500, Batt Percent: 33. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 580 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.696250, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 581 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.695000, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 582 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0056_1/003_02_0056_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.722500, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 583 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0057_1/003_02_0057_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.693750, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 584 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0058_1/003_02_0058_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.690000, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 585 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.778750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0059_1/003_02_0059_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.675000, Batt Percent: 31. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 586 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0070_1/003_02_0070_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1747 seconds. I: Before going to sleep, Batt V: 3.662500, Batt Percent: 31. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 587 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.776250, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0071_1/003_02_0071_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.690000, Batt Percent: 31. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 588 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.753750, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0072_1/003_02_0072_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.685000, Batt Percent: 31. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 589 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.776250, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0073_1/003_02_0073_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.653750, Batt Percent: 30. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 590 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.775000, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.715000, Batt Percent: 30. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 591 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0110/004_01_0110_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.716250, Batt Percent: 30. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 592 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.772500, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0111/004_01_0111_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.680000, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 593 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.771250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0120/004_01_0120_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1750 seconds. I: Before going to sleep, Batt V: 3.712500, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 594 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.772500, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.688750, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 595 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.771250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0058_1/004_02_0058_01_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 3.685000, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 596 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. W: WiFi Disconnected, reason: AUTH_EXPIRE I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0067/004_02_0067_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.685000, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 597 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0068/004_02_0068_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.680000, Batt Percent: 28. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 598 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1745 seconds. I: Before going to sleep, Batt V: 3.708750, Batt Percent: 28. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 599 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.736250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0070/004_02_0070_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1764 seconds. I: Before going to sleep, Batt V: 3.682500, Batt Percent: 28. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 600 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0071/004_02_0071_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.675000, Batt Percent: 28. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 601 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0072/004_02_0072_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.677500, Batt Percent: 28. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 602 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0073/004_02_0073_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.677500, Batt Percent: 27. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 603 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0074/004_02_0074_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.661250, Batt Percent: 27. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 604 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0075/004_02_0075_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.708750, Batt Percent: 27. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 605 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0080/004_02_0080_01/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.665000, Batt Percent: 26. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 606 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.762500, Batt Percent: 26. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: Uploading log file now.