-------------------------------------- DEVICE LOGS -------------------------------------- I: Cleared log file. Starting from fresh after log file upload. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0130/004_02_0130_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1757 seconds. I: Before going to sleep, Batt V: 3.852500, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2306 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.886250, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Cookies/ByteBearCookies3bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.856250, Batt Percent: 62. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2307 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 62. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 27 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Flashlight/ByteBearFlashlight31/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2308 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Garden/ByteBearGarden42/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.856250, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2309 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiToothMulticolors/PandiTooth4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.871250, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2310 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.883750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiThinkGoodThoughts/PandiThinkGoodThoughts4BWRY/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.857500, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2311 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.882500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Jasper_Dark/JasperDarkBWRY4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.856250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2312 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1752. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.855000, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2313 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 25 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.868750, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2314 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 25 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.856250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2315 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.863750, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2316 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.880000, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2317 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 42 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.878750, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2318 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.880000, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2319 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.878750, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2320 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.880000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.880000, Batt Percent: 61. E: Lost established connection, rescanning. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2321 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2322 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.878750, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2323 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.878750, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 49 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.878750, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2324 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2325 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 49 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2326 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.876250, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2327 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.870000, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2328 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.875000, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.877500, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2329 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.878750, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2330 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.868750, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2331 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2332 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.865000, Batt Percent: 61. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2333 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 61. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 31 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.855000, Batt Percent: 61. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2334 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.857500, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2335 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.858750, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2336 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.877500, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.852500, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2337 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.876250, Batt Percent: 60. I: Timeout timer Initialised I: Entered Multi-Function menu. I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0110/004_01_0110_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 903 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2338 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0111/004_01_0111_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2339 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.875000, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0120/004_01_0120_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.841250, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2340 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.873750, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0120/004_02_0120_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.848750, Batt Percent: 60. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2341 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.872500, Batt Percent: 60. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode1_Treasure/LeoTreasure4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1753 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 60. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2342 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.871250, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode2_TheLostEmeraldParrot/LeoParrot4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.836250, Batt Percent: 59. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2343 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode3_RedPuma/LeoRedPuma4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.847500, Batt Percent: 59. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2344 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.870000, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode4_Butterfly/LeoButterfly4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 59. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2345 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.868750, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode5_Kael/LeoKael4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1750 seconds. I: Before going to sleep, Batt V: 3.836250, Batt Percent: 59. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2346 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.868750, Batt Percent: 59. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode6_Desert/LeoDesert4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.850000, Batt Percent: 58. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2347 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.866250, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 10 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Cookies/ByteBearCookies3bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 58. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2348 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.866250, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Flashlight/ByteBearFlashlight31/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.840000, Batt Percent: 58. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2349 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.866250, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Garden/ByteBearGarden42/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.837500, Batt Percent: 58. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2350 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.863750, Batt Percent: 58. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Chinese_Farmer/006_02_0026_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 58. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2351 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.865000, Batt Percent: 57. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0101/004_02_0101_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.863750, Batt Percent: 57. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2352 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.866250, Batt Percent: 57. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.845000, Batt Percent: 57. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2353 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.862500, Batt Percent: 57. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0110/004_02_0110_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.841250, Batt Percent: 57. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2354 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.862500, Batt Percent: 57. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0080/004_02_0080_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.836250, Batt Percent: 57. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2355 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.862500, Batt Percent: 57. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0081/004_02_0081_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.850000, Batt Percent: 57. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2356 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.862500, Batt Percent: 57. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0082/004_02_0082_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.835000, Batt Percent: 57. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2357 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.862500, Batt Percent: 56. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0083/004_02_0083_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.843750, Batt Percent: 56. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2358 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.860000, Batt Percent: 56. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0084/004_02_0084_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.841250, Batt Percent: 56. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2359 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.857500, Batt Percent: 56. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0090/004_02_0090_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1751 seconds. I: Before going to sleep, Batt V: 3.830000, Batt Percent: 56. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2360 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.857500, Batt Percent: 56. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0046/003_02_0046_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.820000, Batt Percent: 56. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2361 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.851250, Batt Percent: 56. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1762. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.851250, Batt Percent: 56. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2362 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.858750, Batt Percent: 56. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.858750, Batt Percent: 56. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2363 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.857500, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.857500, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2364 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.857500, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 35 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.857500, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2365 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.856250, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.856250, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2366 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.856250, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.856250, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2367 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.857500, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.850000, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2368 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.856250, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 40 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.838750, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2369 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.855000, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.838750, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2370 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.856250, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 40 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.811250, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2371 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.855000, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.826250, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2372 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.856250, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.846250, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2373 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.845000, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2374 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.855000, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 43 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.837500, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2375 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.856250, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1792. I: Going to sleep for 1792 seconds. I: Before going to sleep, Batt V: 3.828750, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2376 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2377 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.855000, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.855000, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2378 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.852500, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1796. I: Going to sleep for 1796 seconds. I: Before going to sleep, Batt V: 3.852500, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2379 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2380 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1793. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2381 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1794. I: Going to sleep for 1794 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2382 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 55. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2383 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.853750, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1795. I: Going to sleep for 1795 seconds. I: Before going to sleep, Batt V: 3.853750, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2384 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.852500, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: Sleep duration received from server: 1791. I: Going to sleep for 1791 seconds. I: Before going to sleep, Batt V: 3.852500, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2385 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.852500, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Moon/Moon_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1793 seconds. I: Before going to sleep, Batt V: 3.840000, Batt Percent: 55. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2386 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.851250, Batt Percent: 55. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelBWRY/PandiEnamel4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1744 seconds. I: Before going to sleep, Batt V: 3.822500, Batt Percent: 54. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2387 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.850000, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelKing/PandiEnamelCastle4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1732 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 54. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2388 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.840000, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiForest/PandiForest4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1748 seconds. I: Before going to sleep, Batt V: 3.825000, Batt Percent: 54. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2389 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.848750, Batt Percent: 54. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiKite/PandiKite4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1750 seconds. I: Before going to sleep, Batt V: 3.820000, Batt Percent: 54. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2390 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.848750, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 13 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiLeoForest/PandiLeoForest4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1697 seconds. I: Before going to sleep, Batt V: 3.815000, Batt Percent: 53. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2391 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiStar/PandiStar4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1754 seconds. I: Before going to sleep, Batt V: 3.827500, Batt Percent: 53. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2392 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiThinkGoodThoughts/PandiThinkGoodThoughts4BWRY/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1756 seconds. I: Before going to sleep, Batt V: 3.820000, Batt Percent: 53. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2393 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.846250, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiToothMulticolors/PandiTooth4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1754 seconds. I: Before going to sleep, Batt V: 3.810000, Batt Percent: 53. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2394 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 53. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 9 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWaitingBench/PandiWaitingBench4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1742 seconds. I: Before going to sleep, Batt V: 3.812500, Batt Percent: 52. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2395 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.845000, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWater/PandiWater4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.811250, Batt Percent: 52. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2396 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Prince/Prince4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.813750, Batt Percent: 52. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2397 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.842500, Batt Percent: 52. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Healthy_Eyes/Healthy_Eyes_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1745 seconds. I: Before going to sleep, Batt V: 3.820000, Batt Percent: 51. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2398 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.840000, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Helping_Grandma/Helping_Grandma_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.840000, Batt Percent: 51. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2399 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.838750, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Indian_Space_Research_Organisation/Indian_Space_Research_Organisation_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1742 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 51. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2400 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.841250, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Happily_Growing_Plant/Happily_Growing_Plants_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.818750, Batt Percent: 51. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2401 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.836250, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiProps/006_02_0025_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.801250, Batt Percent: 51. E: Lost established connection, rescanning. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2402 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.838750, Batt Percent: 51. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiText/FarmerPandi42/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.810000, Batt Percent: 51. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2403 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.838750, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/CPR_Story/CPR_Story_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.810000, Batt Percent: 50. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2404 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.838750, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_3/Akber_Birbal_3_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.805000, Batt Percent: 50. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2405 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.837500, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_4/Akber_Birbal_4_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.802500, Batt Percent: 50. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2406 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.836250, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0130/004_02_0130_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1752 seconds. I: Before going to sleep, Batt V: 3.808750, Batt Percent: 50. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2407 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.835000, Batt Percent: 50. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0072_1/003_02_0072_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.828750, Batt Percent: 50. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2408 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.835000, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Jasper_Dark/JasperDarkBWRY4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.813750, Batt Percent: 49. I: WiFi Disconnect complete I: WiFi Disconnected. Firmware process STOP. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. Firmware process START. I: Firmware version number: 2.9.4 I: Session number: 2409 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.833750, Batt Percent: 49. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: Uploading log file now.