-------------------------------------- DEVICE LOGS --------------------------------------
I: Cleared log file. Starting from fresh after log file upload.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1788.
I: Going to sleep for 1788 seconds.
I: Before going to sleep, Batt V: 3.670000, Batt Percent: 9.
E: Lost established connection, rescanning.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2883
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.693750, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.678750, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2884
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.692500, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.677500, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2885
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.691250, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 25 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.677500, Batt Percent: 9.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2886
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.692500, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.670000, Batt Percent: 9.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2887
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.691250, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 3.672500, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2888
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.692500, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.692500, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2889
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.692500, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.692500, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2890
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.691250, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.691250, Batt Percent: 9.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2891
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.691250, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.691250, Batt Percent: 9.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2892
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.691250, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.691250, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2893
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.691250, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.691250, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2894
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.691250, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 3.691250, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2895
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.691250, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.691250, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2896
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.691250, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.691250, Batt Percent: 9.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2897
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.690000, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.690000, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2898
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.685000, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 29 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.685000, Batt Percent: 9.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2899
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.690000, Batt Percent: 9.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 32 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.668750, Batt Percent: 9.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2900
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.690000, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 32 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.677500, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2901
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.688750, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 37 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.680000, Batt Percent: 8.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2902
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.690000, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 38 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1795.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 3.663750, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2903
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.687500, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 38 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.672500, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2904
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.688750, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 37 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.663750, Batt Percent: 8.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2905
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.687500, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 33 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.661250, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2906
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.688750, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.670000, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2907
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.688750, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 38 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.688750, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2908
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.688750, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 38 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1795.
I: Going to sleep for 1795 seconds.
I: Before going to sleep, Batt V: 3.688750, Batt Percent: 8.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2909
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.687500, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 32 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.687500, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2910
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.687500, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 38 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.687500, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2911
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.687500, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 33 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.687500, Batt Percent: 8.
E: Lost established connection, rescanning.
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2912
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.687500, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.687500, Batt Percent: 8.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2913
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.686250, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 40 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.686250, Batt Percent: 8.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2914
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.687500, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 35 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.687500, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2915
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.688750, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.688750, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2916
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.687500, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 29 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.687500, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2917
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.687500, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 29 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0120_1/003_01_0120_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.651250, Batt Percent: 8.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2918
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.686250, Batt Percent: 8.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0130_1/003_01_0130_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1747 seconds.
I: Before going to sleep, Batt V: 3.661250, Batt Percent: 8.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2919
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.163750, Batt Percent: 30.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0140_1/003_01_0140_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1754 seconds.
I: Before going to sleep, Batt V: 4.161250, Batt Percent: 32.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2920
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.190000, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0043/003_02_0043_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1755 seconds.
I: Before going to sleep, Batt V: 4.182500, Batt Percent: 75.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2921
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.137500, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0044/003_02_0044_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1742 seconds.
I: Before going to sleep, Batt V: 4.135000, Batt Percent: 90.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2922
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.137500, Batt Percent: 93.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0045/003_02_0045_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1745 seconds.
I: Before going to sleep, Batt V: 4.137500, Batt Percent: 93.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2923
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.138750, Batt Percent: 93.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0046/003_02_0046_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1748 seconds.
I: Before going to sleep, Batt V: 4.140000, Batt Percent: 93.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2924
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.137500, Batt Percent: 93.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0047/003_02_0047_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.142500, Batt Percent: 93.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2925
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.137500, Batt Percent: 93.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1750 seconds.
I: Before going to sleep, Batt V: 4.137500, Batt Percent: 93.
E: Lost established connection, rescanning.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2926
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.137500, Batt Percent: 93.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1763 seconds.
I: Before going to sleep, Batt V: 4.118750, Batt Percent: 93.
I: WiFi Disconnect complete
I: WiFi Disconnected.
Firmware process STOP.

I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
Firmware process START.
I: Firmware version number: 2.9.4
I: Session number: 2927
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.135000, Batt Percent: 93.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Starting Firmware OTA update.
I: Current Firmware version: 2.9.4.
I: New Firmware Version: 2.9.8.
I: Downloading new firmware version 2.9.8.
I: Installing firmware 2.9.8.
I: OTA update succesfull.
Firmware process START.

I: ESP_RST_SW: Software Reset occured after OTA updates.
I: Firmware version number: 2.9.8
I: Session number: 0
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.116250, Batt Percent: 93.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1655 seconds.
I: Before going to sleep, Batt V: 4.108750, Batt Percent: 93.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 1
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.133750, Batt Percent: 93.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1744 seconds.
I: Before going to sleep, Batt V: 4.098750, Batt Percent: 93.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 2
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.131250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1748 seconds.
I: Before going to sleep, Batt V: 4.106250, Batt Percent: 92.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 3
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.131250, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.112500, Batt Percent: 92.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 4
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.128750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0056_1/003_02_0056_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 4.108750, Batt Percent: 92.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 5
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.128750, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0057_1/003_02_0057_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.110000, Batt Percent: 92.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 6
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0058_1/003_02_0058_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1757 seconds.
I: Before going to sleep, Batt V: 4.111250, Batt Percent: 92.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 7
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.127500, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0059_1/003_02_0059_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1746 seconds.
I: Before going to sleep, Batt V: 4.097500, Batt Percent: 92.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 8
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 92.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0070_1/003_02_0070_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 4.113750, Batt Percent: 92.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 9
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.125000, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0071_1/003_02_0071_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1749 seconds.
I: Before going to sleep, Batt V: 4.100000, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 10
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.123750, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0072_1/003_02_0072_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.090000, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 11
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.122500, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 27 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0073_1/003_02_0073_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1754 seconds.
I: Before going to sleep, Batt V: 4.088750, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 12
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.112500, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 4.098750, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 13
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.120000, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Shelly6-10/Shelly4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1749 seconds.
I: Before going to sleep, Batt V: 4.081250, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 14
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.118750, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/SteveFireWardenStory2/FinalDay4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.100000, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 15
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.117500, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1743 seconds.
I: Before going to sleep, Batt V: 4.095000, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 16
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.117500, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 27 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1761.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.100000, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 17
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.118750, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 32 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 4.118750, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 18
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.108750, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 36 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.108750, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 19
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.108750, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 39 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1787.
I: Going to sleep for 1787 seconds.
I: Before going to sleep, Batt V: 4.108750, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 20
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.116250, Batt Percent: 91.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 39 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.101250, Batt Percent: 91.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 21
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.115000, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 42 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 4.097500, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 22
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.117500, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 42 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.100000, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 23
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.116250, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 41 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.093750, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 24
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.115000, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 44 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 4.091250, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 25
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.115000, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 39 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 4.101250, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 26
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.116250, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1787.
I: Going to sleep for 1787 seconds.
I: Before going to sleep, Batt V: 4.100000, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 27
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.113750, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.098750, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 28
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.113750, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 4.092500, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 29
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.113750, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 41 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.113750, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 30
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.113750, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 39 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.113750, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 31
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.113750, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.113750, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 32
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.113750, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 42 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.113750, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 33
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.111250, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 37 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.111250, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 34
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.112500, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 4.112500, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 35
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.111250, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 25 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1788.
I: Going to sleep for 1788 seconds.
I: Before going to sleep, Batt V: 4.111250, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 36
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.110000, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.110000, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 37
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.112500, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Tribute_to_Noran/Noran024/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.085000, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 38
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.110000, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_4/The_Lazy_Crow_4/bwrY.h
E: Download failed: ESP_FAIL. Retry attempt: 1
I: Going to sleep for 60 seconds.
I: Before going to sleep, Batt V: 4.102500, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 39
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.110000, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_4/The_Lazy_Crow_4/bwrY.h
E: Download failed: ESP_FAIL. Retry attempt: 2
I: Going to sleep for 60 seconds.
I: Before going to sleep, Batt V: 4.097500, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 40
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.108750, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_lazy_crow/The_Lazy_Crow_4/The_Lazy_Crow_4/bwrY.h
E: Download failed after 3 attempts: ESP_FAIL
I: Going to sleep for 1594 seconds.
I: Before going to sleep, Batt V: 4.085000, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 41
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.110000, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/The_Apple_Choice/The_Apple_Choice_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.083750, Batt Percent: 90.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 42
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.110000, Batt Percent: 90.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/SteveFireWardenStory2/FinalDay4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.082500, Batt Percent: 89.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 43
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.098750, Batt Percent: 89.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connection failed or timed out.
I: Going to sleep for 60 seconds.
I: Before going to sleep, Batt V: 4.098750, Batt Percent: 89.
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 44
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.107500, Batt Percent: 89.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/SteveFireWardenStory1/SteveFireWardenText4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1676 seconds.
I: Before going to sleep, Batt V: 4.087500, Batt Percent: 89.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 45
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.106250, Batt Percent: 89.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/StarFishPaula/StarFishPaula4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1746 seconds.
I: Before going to sleep, Batt V: 4.087500, Batt Percent: 89.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 46
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.105000, Batt Percent: 89.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Shelly6-10/Shelly4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 4.088750, Batt Percent: 89.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 47
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.105000, Batt Percent: 89.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Indian_Space_Research_Organisation/Indian_Space_Research_Organisation_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1750 seconds.
I: Before going to sleep, Batt V: 4.072500, Batt Percent: 89.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 48
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.103750, Batt Percent: 89.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0120/004_02_0120_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1750 seconds.
I: Before going to sleep, Batt V: 4.078750, Batt Percent: 89.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 49
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.101250, Batt Percent: 89.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0120/004_01_0120_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 4.082500, Batt Percent: 89.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 50
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.101250, Batt Percent: 89.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0111/004_01_0111_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.082500, Batt Percent: 89.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 51
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.100000, Batt Percent: 88.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0110/004_01_0110_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.080000, Batt Percent: 88.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 52
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.098750, Batt Percent: 88.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 11 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_4/bwrY.h
E: Download failed: ESP_FAIL. Retry attempt: 1
I: Going to sleep for 60 seconds.
I: Before going to sleep, Batt V: 4.081250, Batt Percent: 88.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 53
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.097500, Batt Percent: 88.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1587 seconds.
I: Before going to sleep, Batt V: 4.075000, Batt Percent: 88.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 54
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.096250, Batt Percent: 88.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 10 APs found.
W: WiFi Disconnected, reason: 4WAY_HANDSHAKE_TIMEOUT
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1749 seconds.
I: Before going to sleep, Batt V: 4.078750, Batt Percent: 88.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 55
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.096250, Batt Percent: 88.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0120_1/003_01_0120_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.075000, Batt Percent: 88.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 56
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.095000, Batt Percent: 88.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0110_1/003_01_0110_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.065000, Batt Percent: 88.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 57
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.093750, Batt Percent: 88.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0130_1/003_01_0130_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 4.067500, Batt Percent: 88.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 58
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.096250, Batt Percent: 88.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0140_1/003_01_0140_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 4.075000, Batt Percent: 88.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 59
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.093750, Batt Percent: 88.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1746 seconds.
I: Before going to sleep, Batt V: 4.068750, Batt Percent: 87.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 60
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.076250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.062500, Batt Percent: 87.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 61
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.091250, Batt Percent: 87.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: Uploading log file now.