-------------------------------------- DEVICE LOGS --------------------------------------
I: Cleared log file. Starting from fresh after log file upload.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelKing/PandiEnamelCastle4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1757 seconds.
I: Before going to sleep, Batt V: 4.018750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 165
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.025000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1748.
I: Going to sleep for 1748 seconds.
I: Before going to sleep, Batt V: 4.025000, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 166
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.023750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 167
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 41 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.023750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 168
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 31 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 4.023750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 169
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 36 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 4.023750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 170
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 35 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1787.
I: Going to sleep for 1787 seconds.
I: Before going to sleep, Batt V: 4.023750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 171
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.023750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 172
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 34 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 4.023750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 173
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.022500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 35 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.022500, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 174
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.018750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.018750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 175
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.006250, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 42 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.006250, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 176
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.023750, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 42 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.017500, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 177
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.022500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 38 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 4.008750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 178
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.021250, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 37 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.998750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 179
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 4.002500, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 180
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 40 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 4.005000, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 181
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.022500, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 31 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 4.013750, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 182
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 41 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.012500, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 183
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 79.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 4.002500, Batt Percent: 79.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 184
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 31 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 4.007500, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 185
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.020000, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 3.986250, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 186
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.021250, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.021250, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 187
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.018750, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0130_1/003_01_0130_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 4.003750, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 188
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.018750, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0140_1/003_01_0140_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1753 seconds.
I: Before going to sleep, Batt V: 4.002500, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 189
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.017500, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0120_1/003_01_0120_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1753 seconds.
I: Before going to sleep, Batt V: 3.982500, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 190
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.016250, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0110_1/003_01_0110_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1749 seconds.
I: Before going to sleep, Batt V: 3.998750, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 191
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.016250, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1744 seconds.
I: Before going to sleep, Batt V: 3.996250, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 192
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.006250, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.996250, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 193
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.013750, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0120/004_01_0120_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.990000, Batt Percent: 78.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 194
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.013750, Batt Percent: 78.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0111/004_01_0111_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.987500, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 195
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.011250, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0110/004_01_0110_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.990000, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 196
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.012500, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.978750, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 197
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.011250, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0101/004_02_0101_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.997500, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 198
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.012500, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.997500, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 199
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.008750, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0120/004_02_0120_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.993750, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 200
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.008750, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode1_Treasure/LeoTreasure4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.983750, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 201
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.007500, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode2_TheLostEmeraldParrot/LeoParrot4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1748 seconds.
I: Before going to sleep, Batt V: 3.988750, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 202
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.006250, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode3_RedPuma/LeoRedPuma4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1745 seconds.
I: Before going to sleep, Batt V: 3.983750, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 203
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.003750, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode4_Butterfly/LeoButterfly4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 4.002500, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 204
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.003750, Batt Percent: 77.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode5_Kael/LeoKael4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.990000, Batt Percent: 77.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 205
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.003750, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode6_Desert/LeoDesert4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.967500, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 206
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.003750, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelBWRY/PandiEnamel4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.987500, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 207
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.002500, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelBWRY/PandiEnamel4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1747 seconds.
I: Before going to sleep, Batt V: 3.985000, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 208
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.002500, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiStar/PandiStar4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.972500, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 209
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.000000, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiThinkGoodThoughts/PandiThinkGoodThoughts4BWRY/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.980000, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 210
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 4.001250, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiToothMulticolors/PandiTooth4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.976250, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 211
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.998750, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWaitingBench/PandiWaitingBench4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.975000, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 212
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.998750, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWater/PandiWater4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1748 seconds.
I: Before going to sleep, Batt V: 3.975000, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 213
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.987500, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Jasper_Dark/JasperDarkBWRY4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.977500, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 214
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.997500, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Indian_Space_Research_Organisation/Indian_Space_Research_Organisation_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.976250, Batt Percent: 76.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 215
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.996250, Batt Percent: 76.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 29 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Helping_Grandma/Helping_Grandma_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.962500, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 216
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.995000, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Healthy_Eyes/Healthy_Eyes_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1746 seconds.
I: Before going to sleep, Batt V: 3.963750, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 217
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.993750, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Happily_Growing_Plant/Happily_Growing_Plants_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.971250, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 218
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.995000, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerText/FarmerText4/FarmerText4/bwrY.h
E: Download failed: ESP_FAIL. Retry attempt: 2
I: Going to sleep for 60 seconds.
I: Before going to sleep, Batt V: 3.978750, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 219
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.995000, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 37 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerText/FarmerText4/FarmerText4/bwrY.h
E: Download failed after 3 attempts: ESP_FAIL
I: Going to sleep for 1677 seconds.
I: Before going to sleep, Batt V: 3.971250, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 220
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.992500, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerTextSuperGood/FarmerText4s/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1785 seconds.
I: Before going to sleep, Batt V: 3.972500, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 221
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.993750, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerYellow/FarmerTextYellow4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.977500, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 222
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.991250, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 44 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerBW/FarmerBW4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.968750, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 223
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.990000, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 44 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Coming_Soon/Coming_Soon_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1748 seconds.
I: Before going to sleep, Batt V: 3.960000, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 224
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.990000, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Chinese_Farmer/006_02_0026_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.975000, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 225
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.988750, Batt Percent: 75.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/CPR_Story/CPR_Story_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.971250, Batt Percent: 75.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 226
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.988750, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 41 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_4/Akber_Birbal_4_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.963750, Batt Percent: 74.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 227
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.990000, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 44 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_3/Akber_Birbal_3_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.962500, Batt Percent: 74.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 228
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.986250, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 49 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0130/004_02_0130_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.962500, Batt Percent: 74.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 229
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.986250, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 36 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0100/004_02_0100_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.966250, Batt Percent: 74.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 230
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.983750, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 32 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0101/004_02_0101_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1749 seconds.
I: Before going to sleep, Batt V: 3.957500, Batt Percent: 74.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 231
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.985000, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 25 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1744 seconds.
I: Before going to sleep, Batt V: 3.962500, Batt Percent: 74.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 232
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.982500, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 33 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Cookies/ByteBearCookies3bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1744 seconds.
I: Before going to sleep, Batt V: 3.965000, Batt Percent: 74.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 233
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.982500, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 41 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Flashlight/ByteBearFlashlight31/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.957500, Batt Percent: 74.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 234
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.981250, Batt Percent: 74.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 33 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Garden/ByteBearGarden42/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.961250, Batt Percent: 74.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 235
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.981250, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 30 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiEnd/FarmerPandiEnd4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1749 seconds.
I: Before going to sleep, Batt V: 3.963750, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 236
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.961250, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 36 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiProps/006_02_0025_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.957500, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 237
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.978750, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiText/FarmerPandi42/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 3.952500, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 238
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.978750, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 40 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Jasper_Dark/JasperDarkBWRY4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.953750, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 239
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.977500, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode1_Treasure/LeoTreasure4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.957500, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 240
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.977500, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode2_TheLostEmeraldParrot/LeoParrot4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 3.953750, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 241
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.975000, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode3_RedPuma/LeoRedPuma4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1742 seconds.
I: Before going to sleep, Batt V: 3.956250, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 242
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.976250, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode4_Butterfly/LeoButterfly4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.961250, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 243
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.975000, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode5_Kael/LeoKael4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.961250, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 244
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.975000, Batt Percent: 73.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode6_Desert/LeoDesert4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.952500, Batt Percent: 73.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 245
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.973750, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Moon/Moon_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.943750, Batt Percent: 72.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 246
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.971250, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelBWRY/PandiEnamel4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1746 seconds.
I: Before going to sleep, Batt V: 3.968750, Batt Percent: 72.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 247
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.972500, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelKing/PandiEnamelCastle4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.956250, Batt Percent: 72.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 248
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.971250, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiForest/PandiForest4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.950000, Batt Percent: 72.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 249
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.970000, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiKite/PandiKite4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.950000, Batt Percent: 72.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 250
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.970000, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiLeoForest/PandiLeoForest4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.940000, Batt Percent: 72.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 251
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.968750, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiStar/PandiStar4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1746 seconds.
I: Before going to sleep, Batt V: 3.942500, Batt Percent: 72.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 252
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.968750, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 31 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiThinkGoodThoughts/PandiThinkGoodThoughts4BWRY/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.943750, Batt Percent: 72.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 253
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.967500, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiToothMulticolors/PandiTooth4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.945000, Batt Percent: 72.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 254
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.966250, Batt Percent: 72.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWaitingBench/PandiWaitingBench4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1745 seconds.
I: Before going to sleep, Batt V: 3.945000, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 255
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.965000, Batt Percent: 71.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWater/PandiWater4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1743 seconds.
I: Before going to sleep, Batt V: 3.940000, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 256
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.965000, Batt Percent: 71.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0067/004_02_0067_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.928750, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 257
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.965000, Batt Percent: 71.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0068/004_02_0068_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.955000, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 258
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.963750, Batt Percent: 71.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.946250, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 259
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.962500, Batt Percent: 71.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0070/004_02_0070_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 3.930000, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 260
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.962500, Batt Percent: 71.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: Uploading log file now.