-------------------------------------- DEVICE LOGS --------------------------------------
I: Cleared log file. Starting from fresh after log file upload.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Flashlight/ByteBearFlashlight31/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1755 seconds.
I: Before going to sleep, Batt V: 3.942500, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 261
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.961250, Batt Percent: 71.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Coming_Soon/Coming_Soon_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1751 seconds.
I: Before going to sleep, Batt V: 3.937500, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 262
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.960000, Batt Percent: 71.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Garden/ByteBearGarden42/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1753 seconds.
I: Before going to sleep, Batt V: 3.947500, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 263
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.960000, Batt Percent: 71.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Cookies/ByteBearCookies3bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.938750, Batt Percent: 71.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 264
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.960000, Batt Percent: 70.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Chinese_Farmer/006_02_0026_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 3.950000, Batt Percent: 70.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 265
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.956250, Batt Percent: 70.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 40 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0100/004_02_0100_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1746 seconds.
I: Before going to sleep, Batt V: 3.916250, Batt Percent: 70.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 266
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.957500, Batt Percent: 70.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0101/004_02_0101_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.926250, Batt Percent: 70.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 267
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.956250, Batt Percent: 70.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.910000, Batt Percent: 70.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 268
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.953750, Batt Percent: 70.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0110/004_02_0110_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.937500, Batt Percent: 70.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 269
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.948750, Batt Percent: 70.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0120/004_02_0120_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.930000, Batt Percent: 70.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 270
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.953750, Batt Percent: 70.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0130/004_02_0130_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 3.931250, Batt Percent: 70.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 271
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.952500, Batt Percent: 70.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_3/Akber_Birbal_3_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.923750, Batt Percent: 70.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 272
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.952500, Batt Percent: 70.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_4/Akber_Birbal_4_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.925000, Batt Percent: 70.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 273
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.951250, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerBW/FarmerBW4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.931250, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 274
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.951250, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 38 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiEnd/FarmerPandiEnd4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.915000, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 275
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.950000, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiProps/006_02_0025_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1747 seconds.
I: Before going to sleep, Batt V: 3.928750, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 276
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.948750, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 50 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiText/FarmerPandi42/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.927500, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 277
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.950000, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 42 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerTextSuperGood/FarmerText4s/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.923750, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 278
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.947500, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 48 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerYellow/FarmerTextYellow4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.921250, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 279
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.947500, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 46 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Happily_Growing_Plant/Happily_Growing_Plants_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.910000, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 280
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.946250, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 41 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Healthy_Eyes/Healthy_Eyes_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.937500, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 281
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.943750, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Helping_Grandma/Helping_Grandma_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 3.892500, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 282
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.943750, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 35 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Indian_Space_Research_Organisation/Indian_Space_Research_Organisation_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.925000, Batt Percent: 69.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 283
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.943750, Batt Percent: 69.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 31 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0043/003_02_0043_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1745 seconds.
I: Before going to sleep, Batt V: 3.920000, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 284
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.942500, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 37 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0044/003_02_0044_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.922500, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 285
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.941250, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0045/003_02_0045_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.910000, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 286
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.942500, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 26 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0046/003_02_0046_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.917500, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 287
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.941250, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0047/003_02_0047_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.922500, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 288
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.940000, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1749 seconds.
I: Before going to sleep, Batt V: 3.921250, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 289
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.940000, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.918750, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 290
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.938750, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 37 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 3.916250, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 291
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.938750, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 3.888750, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 292
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.936250, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 31 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1764 seconds.
I: Before going to sleep, Batt V: 3.912500, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 293
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.937500, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 28 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1747 seconds.
I: Before going to sleep, Batt V: 3.921250, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 294
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.936250, Batt Percent: 68.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0056_1/003_02_0056_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.912500, Batt Percent: 68.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 295
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.933750, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0057_1/003_02_0057_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1744 seconds.
I: Before going to sleep, Batt V: 3.905000, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 296
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.933750, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0058_1/003_02_0058_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1741 seconds.
I: Before going to sleep, Batt V: 3.907500, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 297
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.935000, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 23 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0059_1/003_02_0059_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.913750, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 298
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.933750, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0070_1/003_02_0070_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.901250, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 299
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.931250, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 22 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0071_1/003_02_0071_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.913750, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 300
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.931250, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0072_1/003_02_0072_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1742 seconds.
I: Before going to sleep, Batt V: 3.900000, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 301
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.930000, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0073_1/003_02_0073_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.906250, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 302
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.930000, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.906250, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 303
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.930000, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0110/004_01_0110_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.908750, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 304
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.918750, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0111/004_01_0111_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1749 seconds.
I: Before going to sleep, Batt V: 3.906250, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 305
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.926250, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0120/004_01_0120_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.908750, Batt Percent: 67.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 306
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.925000, Batt Percent: 67.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1755 seconds.
I: Before going to sleep, Batt V: 3.901250, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 307
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.925000, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0067/004_02_0067_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1747 seconds.
I: Before going to sleep, Batt V: 3.892500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 308
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.926250, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0068/004_02_0068_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.897500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 309
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.925000, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Jasper_Dark/JasperDarkBWRY4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1758 seconds.
I: Before going to sleep, Batt V: 3.922500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 310
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.922500, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1760.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.922500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 311
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.923750, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.923750, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 312
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.923750, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 25 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 3.923750, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 313
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.923750, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 39 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1788.
I: Going to sleep for 1788 seconds.
I: Before going to sleep, Batt V: 3.923750, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 314
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.922500, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 44 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 3.922500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 315
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.922500, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 40 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.922500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 316
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.922500, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 41 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.922500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 317
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.923750, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 36 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.923750, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 318
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.921250, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 36 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 3.921250, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 319
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.921250, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 40 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 3.921250, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 320
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.910000, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1790.
I: Going to sleep for 1790 seconds.
I: Before going to sleep, Batt V: 3.910000, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 321
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.921250, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 45 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 3.920000, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 322
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.921250, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 40 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 3.895000, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 323
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.920000, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 47 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1791.
I: Going to sleep for 1791 seconds.
I: Before going to sleep, Batt V: 3.905000, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 324
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.921250, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 43 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 3.897500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 325
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.921250, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 42 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1794.
I: Going to sleep for 1794 seconds.
I: Before going to sleep, Batt V: 3.905000, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 326
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.922500, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 42 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.907500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 327
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.920000, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 35 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.906250, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 328
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.920000, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 27 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1789.
I: Going to sleep for 1789 seconds.
I: Before going to sleep, Batt V: 3.893750, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 329
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.920000, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 21 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1792.
I: Going to sleep for 1792 seconds.
I: Before going to sleep, Batt V: 3.920000, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 330
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.920000, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: Sleep duration received from server: 1793.
I: Going to sleep for 1793 seconds.
I: Before going to sleep, Batt V: 3.920000, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 331
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.918750, Batt Percent: 66.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ManRowing/ManRowing_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 638 seconds.
I: Before going to sleep, Batt V: 3.900000, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 332
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.917500, Batt Percent: 66.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1735 seconds.
I: Before going to sleep, Batt V: 3.902500, Batt Percent: 66.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 333
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.917500, Batt Percent: 66.
I: Timeout timer Initialised
I: Entered Multi-Function menu.
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiLuggage/Pandi_Luggage4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 590 seconds.
I: Before going to sleep, Batt V: 3.892500, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 334
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.917500, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0075/004_02_0075_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1748 seconds.
I: Before going to sleep, Batt V: 3.885000, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 335
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.916250, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0082/004_02_0082_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1749 seconds.
I: Before going to sleep, Batt V: 3.888750, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 336
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.916250, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.888750, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 337
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.913750, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0110/004_02_0110_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.888750, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 338
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.913750, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0120/004_02_0120_04/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.885000, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 339
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.913750, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Cookies/ByteBearCookies3bmp/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.897500, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 340
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.912500, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Flashlight/ByteBearFlashlight31/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.882500, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 341
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.913750, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 15 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Garden/ByteBearGarden42/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.900000, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 342
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.912500, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/CPR_Story/CPR_Story_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.898750, Batt Percent: 65.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 343
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.911250, Batt Percent: 65.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 18 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerBW/FarmerBW4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.883750, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 344
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.910000, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/FarmerPandiEnd/FarmerPandiEnd4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.886250, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 345
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.910000, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 13 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Happily_Growing_Plant/Happily_Growing_Plants_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.881250, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 346
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.908750, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 12 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Healthy_Eyes/Healthy_Eyes_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1746 seconds.
I: Before going to sleep, Batt V: 3.890000, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 347
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.908750, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 17 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Indian_Space_Research_Organisation/Indian_Space_Research_Organisation_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.892500, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 348
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.906250, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 14 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ManRowing/ManRowing_4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.885000, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 349
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.905000, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelBWRY/PandiEnamel4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1760 seconds.
I: Before going to sleep, Batt V: 3.885000, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 350
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.906250, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 19 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelKing/PandiEnamelCastle4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1757 seconds.
I: Before going to sleep, Batt V: 3.885000, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 351
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.903750, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 25 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiLuggage/Pandi_Luggage4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.877500, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 352
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.897500, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 20 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiToothMulticolors/PandiTooth4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1761 seconds.
I: Before going to sleep, Batt V: 3.882500, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 353
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.902500, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 16 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWaitingBench/PandiWaitingBench4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1762 seconds.
I: Before going to sleep, Batt V: 3.885000, Batt Percent: 64.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 354
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.901250, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 24 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: MQTT initialisation successful. Initial message sent.
I: Start Timeout Timer for 1 minute.
I: Connected to Broker.
I: All configuration available. Display image: Mode one operation.
I: Downloading image.
I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Prince/Prince4/bwrY.h
I: Image Download successful
I: Start Timeout Timer for 1 minute.
I: GPIO for EPD operation initialised.
I: EPD HW initialised.
I: Image array check and update on display.
I: Display going to Deep Sleep.
I: Going to sleep for 1759 seconds.
I: Before going to sleep, Batt V: 3.873750, Batt Percent: 63.
W: WiFi Disconnected, reason: ASSOC_LEAVE
I: Device going to sleep.
Firmware process STOP.

Firmware process START.
I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset.
I: Firmware version number: 2.9.8
I: Session number: 355
I: Watchdog Timer Initialised successfully.
I: LED Initialised successfully.
I: NVS Initialised successfully.
I: Batt V: 3.902500, Batt Percent: 64.
I: Timeout timer Initialised
I: WiFi credentials loaded.
I: Scan complete: 27 APs found.
I: WiFi connected successfully.
I: No device location. Time/location not recorded.
I: Uploading log file now.