-------------------------------------- DEVICE LOGS -------------------------------------- I: Cleared log file. Starting from fresh after log file upload. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Rhyme_English_Humpty/Rhyme_English_Humpty_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1756 seconds. I: Before going to sleep, Batt V: 3.770000, Batt Percent: 39. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 563 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 39. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ProactiveCareFrog/FrogSpasuper4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.781250, Batt Percent: 39. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 564 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/BoilingFrogPaula/BoilingFrogPaula4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 38. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 565 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.800000, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 43 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_3/Akber_Birbal_3_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.790000, Batt Percent: 38. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 566 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Akber_Birbal_4/Akber_Birbal_4_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 38. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 567 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.798750, Batt Percent: 38. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0101/004_02_0101_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.771250, Batt Percent: 38. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 568 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.796250, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 50 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.760000, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 569 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.796250, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 42 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0140_1/003_01_0140_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1743 seconds. I: Before going to sleep, Batt V: 3.780000, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 570 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.795000, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 33 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0130_1/003_01_0130_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 571 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.795000, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0120_1/003_01_0120_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 572 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.793750, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 43 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_01_0110_1/003_01_0110_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.776250, Batt Percent: 37. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 573 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 37. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 47 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0046/003_02_0046_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 574 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.793750, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0044/003_02_0044_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.777500, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 575 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0048/003_02_0048_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.758750, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 576 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0047/003_02_0047_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.773750, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 577 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.792500, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 42 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0051_1/003_02_0051_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.747500, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 578 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.791250, Batt Percent: 36. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0052_1/003_02_0052_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.765000, Batt Percent: 36. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 579 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.788750, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0053_1/003_02_0053_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 580 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.788750, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0054_1/003_02_0054_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1747 seconds. I: Before going to sleep, Batt V: 3.758750, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 581 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.787500, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 26 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0055_1/003_02_0055_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.760000, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 582 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0056_1/003_02_0056_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.763750, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 583 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.787500, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0057_1/003_02_0057_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.760000, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 584 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.787500, Batt Percent: 35. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0058_1/003_02_0058_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1744 seconds. I: Before going to sleep, Batt V: 3.768750, Batt Percent: 35. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 585 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0059_1/003_02_0059_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1745 seconds. I: Before going to sleep, Batt V: 3.755000, Batt Percent: 34. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 586 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0070_1/003_02_0070_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 34. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 587 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.782500, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0071_1/003_02_0071_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.767500, Batt Percent: 34. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 588 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.782500, Batt Percent: 34. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0072_1/003_02_0072_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.763750, Batt Percent: 34. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 589 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.785000, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_02_0073_1/003_02_0073_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1762 seconds. I: Before going to sleep, Batt V: 3.760000, Batt Percent: 33. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 590 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.782500, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/003_07_0080_1/003_07_0080_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1757 seconds. I: Before going to sleep, Batt V: 3.766250, Batt Percent: 33. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 591 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.781250, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0110/004_01_0110_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.761250, Batt Percent: 33. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 592 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 33. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0111/004_01_0111_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1744 seconds. I: Before going to sleep, Batt V: 3.757500, Batt Percent: 33. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 593 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0120/004_01_0120_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 594 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_01_0130/004_01_0130_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1742 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 595 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.780000, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0058_1/004_02_0058_04_1/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1740 seconds. I: Before going to sleep, Batt V: 3.743750, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 596 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0067/004_02_0067_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.748750, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 597 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 32. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0068/004_02_0068_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.760000, Batt Percent: 32. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 598 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.753750, Batt Percent: 31. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 599 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.777500, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0070/004_02_0070_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1744 seconds. I: Before going to sleep, Batt V: 3.751250, Batt Percent: 31. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 600 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.775000, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0071/004_02_0071_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.751250, Batt Percent: 31. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 601 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 31. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0072/004_02_0072_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.756250, Batt Percent: 30. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 602 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.775000, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0073/004_02_0073_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.751250, Batt Percent: 30. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 603 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.773750, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0074/004_02_0074_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.743750, Batt Percent: 30. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 604 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.772500, Batt Percent: 30. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0075/004_02_0075_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.751250, Batt Percent: 30. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 605 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.771250, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0080/004_02_0080_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.735000, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 606 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelBWRY/PandiEnamel4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.745000, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 607 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.770000, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiEnamelKing/PandiEnamelCastle4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1746 seconds. I: Before going to sleep, Batt V: 3.743750, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 608 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.768750, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiForest/PandiForest4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1745 seconds. I: Before going to sleep, Batt V: 3.745000, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 609 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.768750, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 28 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiKite/PandiKite4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1743 seconds. I: Before going to sleep, Batt V: 3.758750, Batt Percent: 29. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 610 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 29. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 33 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiLeoForest/PandiLeoForest4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1757 seconds. I: Before going to sleep, Batt V: 3.746250, Batt Percent: 28. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 611 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.768750, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 43 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiLuggage/Pandi_Luggage4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.726250, Batt Percent: 28. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 612 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.767500, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiStar/PandiStar4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.730000, Batt Percent: 28. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 613 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.766250, Batt Percent: 28. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 46 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiThinkGoodThoughts/PandiThinkGoodThoughts4BWRY/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1749 seconds. I: Before going to sleep, Batt V: 3.750000, Batt Percent: 28. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 614 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.765000, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiToothMulticolors/PandiTooth4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.746250, Batt Percent: 27. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 615 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.765000, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWaitingBench/PandiWaitingBench4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.737500, Batt Percent: 27. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 616 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 27. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 42 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/PandiWater/PandiWater4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.736250, Batt Percent: 27. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 617 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.763750, Batt Percent: 26. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 48 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Prince/Prince4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.745000, Batt Percent: 26. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 618 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.762500, Batt Percent: 26. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 43 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode1_Treasure/LeoTreasure4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.741250, Batt Percent: 26. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 619 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.762500, Batt Percent: 26. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode2_TheLostEmeraldParrot/LeoParrot4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.743750, Batt Percent: 26. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 620 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.761250, Batt Percent: 26. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode3_RedPuma/LeoRedPuma4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.745000, Batt Percent: 26. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 621 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.760000, Batt Percent: 26. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode4_Butterfly/LeoButterfly4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.727500, Batt Percent: 26. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 622 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.761250, Batt Percent: 26. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 41 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode5_Kael/LeoKael4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1747 seconds. I: Before going to sleep, Batt V: 3.728750, Batt Percent: 26. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 623 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.761250, Batt Percent: 25. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 45 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/LeoEpisode6_Desert/LeoDesert4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.747500, Batt Percent: 25. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 624 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.758750, Batt Percent: 25. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 34 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ManRowing/ManRowing_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1747 seconds. I: Before going to sleep, Batt V: 3.736250, Batt Percent: 25. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 625 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.756250, Batt Percent: 25. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 38 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Jasper_Dark/JasperDarkBWRY4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.731250, Batt Percent: 25. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 626 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.758750, Batt Percent: 25. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 44 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/Chinese_Farmer/006_02_0026_4/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.736250, Batt Percent: 24. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 627 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.757500, Batt Percent: 24. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 27 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Garden/ByteBearGarden42/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.733750, Batt Percent: 24. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 628 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.757500, Batt Percent: 24. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 29 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Flashlight/ByteBearFlashlight31/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.728750, Batt Percent: 24. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 629 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.753750, Batt Percent: 24. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/ByteBear_Cookies/ByteBearCookies3bmp/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.723750, Batt Percent: 24. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 630 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.755000, Batt Percent: 24. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 39 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0067/004_02_0067_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.731250, Batt Percent: 24. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 631 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.755000, Batt Percent: 23. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 32 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0068/004_02_0068_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.732500, Batt Percent: 23. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 632 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.753750, Batt Percent: 23. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0069/004_02_0069_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.732500, Batt Percent: 23. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 633 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.753750, Batt Percent: 23. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0070/004_02_0070_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1748 seconds. I: Before going to sleep, Batt V: 3.737500, Batt Percent: 23. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 634 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.752500, Batt Percent: 23. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 30 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0071/004_02_0071_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1748 seconds. I: Before going to sleep, Batt V: 3.726250, Batt Percent: 23. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 635 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.752500, Batt Percent: 23. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0072/004_02_0072_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.706250, Batt Percent: 23. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 636 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.750000, Batt Percent: 22. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 19 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0073/004_02_0073_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1748 seconds. I: Before going to sleep, Batt V: 3.720000, Batt Percent: 22. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 637 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.748750, Batt Percent: 22. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 20 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0074/004_02_0074_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1748 seconds. I: Before going to sleep, Batt V: 3.717500, Batt Percent: 22. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 638 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.748750, Batt Percent: 22. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 23 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0075/004_02_0075_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1745 seconds. I: Before going to sleep, Batt V: 3.728750, Batt Percent: 22. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 639 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.747500, Batt Percent: 22. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 17 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0080/004_02_0080_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.726250, Batt Percent: 21. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 640 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.747500, Batt Percent: 21. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 14 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0081/004_02_0081_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1763 seconds. I: Before going to sleep, Batt V: 3.720000, Batt Percent: 21. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 641 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.746250, Batt Percent: 21. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 12 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0082/004_02_0082_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.728750, Batt Percent: 21. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 642 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.746250, Batt Percent: 21. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0083/004_02_0083_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1759 seconds. I: Before going to sleep, Batt V: 3.718750, Batt Percent: 21. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 643 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.746250, Batt Percent: 20. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 37 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0084/004_02_0084_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.725000, Batt Percent: 20. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 644 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.745000, Batt Percent: 20. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 21 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0090/004_02_0090_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.720000, Batt Percent: 20. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 645 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.745000, Batt Percent: 20. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 24 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0110/004_02_0110_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.717500, Batt Percent: 20. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 646 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.742500, Batt Percent: 20. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 11 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0102/004_02_0102_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.717500, Batt Percent: 20. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 647 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.742500, Batt Percent: 20. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0101/004_02_0101_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1761 seconds. I: Before going to sleep, Batt V: 3.711250, Batt Percent: 20. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 648 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.742500, Batt Percent: 19. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 16 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0100/004_02_0100_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1760 seconds. I: Before going to sleep, Batt V: 3.711250, Batt Percent: 19. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 649 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.742500, Batt Percent: 19. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 15 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0090/004_02_0090_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1758 seconds. I: Before going to sleep, Batt V: 3.713750, Batt Percent: 19. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 650 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.740000, Batt Percent: 19. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 22 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: MQTT initialisation successful. Initial message sent. I: Start Timeout Timer for 1 minute. I: Connected to Broker. I: All configuration available. Display image: Mode one operation. I: Downloading image. I: URL: https://ftp.esquareinnovations.co.uk/storyboard/BWRY/75/004_02_0084/004_02_0084_04/bwrY.h I: Image Download successful I: Start Timeout Timer for 1 minute. I: GPIO for EPD operation initialised. I: EPD HW initialised. I: Image array check and update on display. I: Display going to Deep Sleep. I: Going to sleep for 1744 seconds. I: Before going to sleep, Batt V: 3.711250, Batt Percent: 19. W: WiFi Disconnected, reason: ASSOC_LEAVE I: Device going to sleep. Firmware process STOP. Firmware process START. I: ESP_RST_DEEPSLEEP: Deep sleep wakeup. Not reset. I: Firmware version number: 2.9.8 I: Session number: 651 I: Watchdog Timer Initialised successfully. I: LED Initialised successfully. I: NVS Initialised successfully. I: Batt V: 3.738750, Batt Percent: 19. I: Timeout timer Initialised I: WiFi credentials loaded. I: Scan complete: 18 APs found. I: WiFi connected successfully. I: No device location. Time/location not recorded. I: Uploading log file now.